DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

3. Check Search.Select alarm typeCheck SearchSelect NVR and channelEnter start and end timeClick Search4. Under Device, select the NVR you would like to search.5. Under Start Time and End Time, enter the start and end times for your search.6. Click Search. A list of relevant alarms appears below.Using Playback ModeYou can view recorded footage from your NVR’s in the CMS software.To use playback mode:1. Click Playback ( ).2. Under Device, select the NVR and channel you would like to search.Select ChannelSelect NVRSelect searchparametersClick Search• Check Multiple channel to playback video from multiple cameras. Select camera and thenclick Add. Repeat to add additional cameras.3. Under Parameter, select the start and end time for the search.4. Click Search.46