13.07.2015 Views

DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

DNR200V_SERIES_MANUAL_EN_R1_web - Digimerge

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Appendix C: Auto Port Forwarding WizardConfiguring a DMZ host connection• Connect to "Router 1" on your network (referredto as "Possible 1st Router" in the Auto PortForwarding Wizard). Obtain the IP address ofRouter 1. Usually this can be found in the "Status"section of your router menu. The IP should beginwith "192.168...."This IP address is your DMZ IP.• Enter the IP address obtained from Router 1 intothe DMZ section of Router 2.• Once you have configured Router 2 with a DMZconnection, run the Auto Port Forwarding Wizardto begin auto port forwarding to Router 1.• Consult your router’s owner’s manual for detailson configuring DMZ settings.ExampleDMZ stands for Demilitarized Zone. Enabling a DMZIP on your router enables one of the routers to passinformation onto the second router.DMZ IP addressassigned by asecondary routerLocating your Router IP - The Status PageThe "Status Page" of a router normally includes the router’svital information such as the IP address.EXAMPLEThe IP information isnormally under aheader called "WAN" or"Internet Port". Eachrouter has differentterminology.Router IP assigned bythe main router. Enterthis IP into the DMZsection of the primaryrouter.96

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!