REER-Mosaic Manual

More documents

Recommendations

Info

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC 3) The counter generates a pulse duration equal to the system response time as soon as the set count is reached. If the CLEAR signal is activated, the internal count goes back to 0. Parameters Clear Enable: If selected this enables the request to clear in order to restart the counter setting output Q to 0 (FALSE). It also offers the possibility of enabling or not enabling (Automatic Enable) automatic operation with manual reset. If this is not selected operation is automatic. Once the set count is reached output Q is set to 1(TRUE) and stays in this condition for two internal cycles after which it is resetted. Ck down: Enables counting down. Two-way: If selected it enables counting on both the rising and falling edges. English 118 8540780 • 12/01/2016 • Rev.25
MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC TIMER OPERATORS (max number = 32) TIMER operators allow you to generate a signal (TRUE or FALSE) for a user-definable period. The CLOCKING operator generates a clock signal output with the set period if the IN input is 1 (TRUE). Clocking has up to 7 inputs to control output Duty Cycle. Parameters Time: The period can be set to between 10 ms and 1098.3 s. Duty cycle selection: Up to 7 inputs can be selected for 7 different output signal duty cycles. Depending on the active input, the OUT clock signal has its corresponding duty cycle. EN input must always be high level (TRUE). Refer to the table below to check operator functioning. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The circuit upstream of the CLOCKING operator must guarantee the presence of a single input signal other than the EN enable (apart from the pair 10% 80%). The presence of the EN input together with > 1 high level (TRUE) inputs, generates an output signal with a duty cycle = 50%. English 8540780 • 12/01/2016 • Rev.25 119
Page 1 and 2:
MODULAR SAFETY INTEGRATED CONTROLLE
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68: MODULAR SAFETY INTEGRATED CONTROLLE
Page 117: MODULAR SAFETY INTEGRATED CONTROLLE
Page 143: MODULAR SAFETY INTEGRATED CONTROLLE
show all

REER-Mosaic Manual

Create successful ePaper yourself

Delete template?

Save as template?