REER-Mosaic Manual

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
MOR4 (Figure 31)
OFF
OFF
OFF
• Return the unit to ReeR
to be repaired
OFF
OFF
• Firmware version not
compatible with M1,
return to ReeR for FW
upgrade.
OFF OFF OFF
OFF OFF
Shows the
physical address
of the unit
OFF OFF
OFF OFF OFF OFF
OFF OFF OFF
• If the problem persists,
return the module to
ReeR to be repaired
• Restart the system
• If the problem persists,
return the module to
ReeR to be repaired
• Restart the system
• Check which unit is in
FAIL mode
• Change the unit's
address (see )
ON
OFF
• Verify connections
5,6,7,8.
OFF OFF OFF OFF
• Return the module to
ReeR to be repaired
Figure 31 - MOR4
Table 51 - Troubleshooting MOR4
English
8540780 • 12/01/2016 • Rev.25 57