REER-Mosaic Manual

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
MI12T8 (Figure 28)
OFF
OFF
OFF
OFF
OFF
OFF OFF Shows the physical
address of the unit
OFF
OFF OFF OFF
Return the unit to ReeR to be repaired
• Firmware version not compatible with M1,
return to ReeR for FW upgrade.
• Restart the system
• If the problem persists, return the MI12T8
to ReeR to be repaired
• Restart the system
• Check which unit is in FAIL mode
OFF OFF • Change the unit's address (see )
OFF OFF OFF • Return the unit to ReeR to be repaired
Table 48 - Troubleshooting MI12T8
Figure 28 -
MI12T8
English
54 8540780 • 12/01/2016 • Rev.25