catalogo-8020_compressed

Fastening Methods
45 Degree Support Connector
Metric
40 Series Machining
Part Description:
The 45 degree support connector provides a clean, flush connection and is typically used to reinforce a
90 degree connection. It requires minimal machining (an end tap to the support bar) and mounts using
standard hardware. The 45 degree support connector is designed for use with 40mm by 40mm profiles.
This connection lends itself to applications with heavy loads to minimize beam deflection.
ø F
FASTENERS
A
B
C
D
E
Part No. Series Material Finish A B C D E F Weight
14118 Aluminum Clear Powder Coat 52.00mm 40.00mm 45° 2.00mm 8.00mm 9.00mm .2123 kg
Required Machining Services
Bolt
Machining Type Profile Machined Reference Page
Tap Profile End Profile End 861
Suggested Hardware (Mount to T-Slot)
Part No. Series Qty. Description T-Nut Location
11-8520 1 M8 x 20mm SHCS — To Profile End
75-3621 1 M8 x 16mm SHCS Economy To T-Slot
45 Degree Support Connector
Profile
T-Nut
228
For the most up to date information on 80/20 ® products visit 8020.net