catalogo-8020_compressed

T-Slotted Aluminum Profiles
Part Number Concept & Identification
Most fractional and metic T-slot profiles have part numbers that directly coincide with the profile’s
physical measurements. Fractional profile part numbers contain four characters. Metric profile part
numbers contain six characters, which relate to the profile’s series and dimensions. This series partnumbering
concept is explained in more detail below.
Fractional Profile Naming Standards
PROFILES
Example: 15 series profiles always measure .75” from the outside edge of the profile to the center of the T-slot.
Metric Profile Naming Standards
Example: 40 series profiles always measure 20.00mm from the outside edge of the profile to the center of the T-slot.
Basic Concept
The dimensions of your
profile usually spell out
its part number.
For the most up to date information on 80/20 ® products visit 8020.net
59