catalogo-8020_compressed

Machining Services
Fractional
Metric
Cut Plastic Panel to Size / Aluminum Plate to Size / Shear Wire Mesh to Size
Part Description:
The cut panel to size machining service is used to create custom plastic, mesh, or aluminum plates and
panels. It has a tolerance of plus or minus .060” (1.52mm) and there are options available to accommodate
different thicknesses and required lengths.
Cut Plastic Panel or Aluminum Plate to Size
MACHINING SERVICES
Panel
Part No.
Aluminum
Part No.
Series Service Type Cut Tolerance
7150 7167 Cut Plastic Panel or Aluminum Plate ALL Sides ≤ 48” for Panels Up To .250” Thick
7155 7168 Cut Plastic Panel or Aluminum Plate ANY Side > 48” for Panels Up To .250” Thick
7151 7169 Cut Plastic Panel or Aluminum Plate ALL Sides ≤ 48” for Panels Thicker Than .250”
7153 7170 Cut Plastic Panel or Aluminum Plate ANY Side > 48” for Panels Thicker Than .250”
65-7150 65-7167 Cut Plastic Panel or Aluminum Plate ALL Sides ≤ 1220mm for Panels Up To 6mm Thick
65-7155 65-7168 Cut Plastic Panel or Aluminum Plate ANY Side > 1220mm for Panels Up To 6mm Thick
65-7151 65-7169 Cut Plastic Panel or Aluminum Plate ALL Sides ≤ 1220mm for Panels Thicker Than 6mm
65-7153 65-7170 Cut Plastic Panel or Aluminum Plate ANY Side > 1220mm for Panels Thicker Than 6mm
+/- .060”
+/- 1.52mm
Shear Wire Mesh to Size
Part No. Series Service Type Cut Tolerance
7095 Shear Wire Mesh ALL Sides ≤ 48”
7100 Shear Wire Mesh ANY Side > 48”
+/- .060”
65-7095 Shear Wire Mesh ALL Sides ≤ 1220mm
65-7100 Shear Wire Mesh ANY Side > 1220mm
+/- 1.52mm
884
For the most up to date information on 80/20 ® products visit 8020.net