catalogo-8020_compressed

45 Series 30 Series Metric
Panels & Doors
4 Hole - Transition Hinge
Part Description:
The 4 hole - transition hinge is available in stainless steel or black powder-coat zinc. It is commonly used to
mount larger doors or two profiles. This hinge can be used as a transition from 30 to 45 series profiles and
can be easily assembled with the suggested mounting hardware listed below.
E
K
D
F
L
C
G
ø J
B
A
H
Part No. Series Max Load A B C D E F G H J K L Weight
12064 to 60 Nm / 50.00mm 30.00mm 25.00mm 38.00mm M6 FHSCS 28.00mm 15.00mm 6.00mm 6.00mm 6.00mm 63.00mm .1049 kg
12065 to 44 ft-Lbs. 50.00mm 30.00mm 25.00mm 38.00mm M6 FHSCS 28.00mm 15.00mm 6.00mm 6.00mm 6.00mm 63.00mm .1283 kg
Material Specifications
Part No. Material Grade Finish Process
12064 Zinc Zn Al Cu 1 Black Powder Coat Die-Casting
12065 Stainless-Steel 316 Stainless Die-Casting
T-Nut
Suggested Hardware Per Leaf (Mount to T-Slot)
PANELS & DOORS
Part No. Series Qty. Bolt T-Nut
75-3585
2 M6 x 14mm FHSCS Drop-In
AND
75-3587 2 M6 x 18mm FHSCS Drop-In
Suggested Hardware Per Leaf (Mount to Panel ≤ .250” / 6mm)
Part No. Series Qty. Bolt Hex Nut Washer
11-6718 2 M6 x 18mm FHSCS 11-6065 11-6041
Profile
Bolt
4-Hole - Transition Hinge
For the most up to date information on 80/20 ® products visit 8020.net
551