catalogo-8020_compressed

40 Series 25 Series Metric 15 Series 10 Series Fractional
Add-On Components
Standard Universal Dynamic Pivot Assembly with Dual “L” Arms
Part Description:
The standard universal dynamic pivot assembly with dual “L” arms is typically used to create either a
perpendicular or parallel dynamic pivot with full axial motion ranging from 0-180 degrees. The assembly
includes one universal dynamic pivot nub and two “L” dynamic pivot arms. It has permanently lubricated
bronze bushings that act as high-strength pivot points and nylon thrust washers that protect the pivot arms.
This assembly offers a high load capacity while ensuring a long life cycle. The hardware to connect the nub
to the profile, the nub to the arms, and the arms to the profile are all included.
C
A
B
D
E
F
Part No. Series Nub (Qty.) Arm (Qty.) Color A B C D E F Weight
4171 4177 (1) 4172 (2) Clear 6.010” .500” 1.000” 1.000” 1.000” 1.275” .391 lb
4171-Black 4177 (1) 4172 (2) Black 6.010” .500” 1.000” 1.000” 1.000” 1.275” .391 lb
4323 4377 (1) 4343 (2) Clear 9.012” .750” 1.500” 1.500” 1.500” 1.950” 1.275 lb
4323-Black 4377 (1) 4343 (2) Black 9.012” .750” 1.500” 1.500” 1.500” 1.950” 1.275 lb
25-4171 25-4177 (1) 25-4172 (2) Clear 150.22mm 12.50mm 25.00mm 25.00mm 25.00mm 31.88mm .1667 kg
25-4171-Black 25-4177 (1) 25-4172 (2) Black 150.22mm 12.50mm 25.00mm 25.00mm 25.00mm 31.88mm .1667 kg
40-4323 40-4377 (1) 40-4343 (2) Clear 240.22mm 20.00mm 40.00mm 40.00mm 40.00mm 51.43mm .5797 kg
40-4323-Black 40-4377 (1) 40-4343 (2) Black 240.22mm 20.00mm 40.00mm 40.00mm 40.00mm 51.43mm .5797 kg
Material Specifications
Material Alloy* Finish
Aluminum 6105-T5 Anodize
* Or comparable
Included Mounting Hardware
Bolt
T-Nut
Nub to Profile Arms to Nub Arms to Profile
Series Part No. Qty. Part No. Qty. Part No. Qty.
Standard Universal
Dynamic Pivot Assy.
3306 2 3501 1 3414 4
3613 2 3500 1 3412 4
75-3415 2 25-3501 1 75-3541 4
75-3479 2 40-3500 1 75-3508 4
For the most up to date information on 80/20 ® products visit 8020.net
Profile
725
ADD-ON COMPONENTS