catalogo-8020_compressed

40 Series 25 Series Metric 15 Series 10 Series Fractional
Machining Services
Economy T-Nut Clearance Profile Milling
Part Description:
The economy T-nut clearance profile milling service allows placement of an economy T-nut into a T-slot profile
when the ends are captivated. See the hardware section beginning on page 364 for information on economy
T-nuts. Additional Information: When ordering this service, specify the distance from the end of the
profile to the centerline (CL) and designate T-slot location that requires the service.
Distance From Profile
End To Slot Center
C
R .219”
(5.56mm)
T-Slot Center
B
A
Part No. Series Compatiable T-Nut Type Slot Length “A” Slot Width “B” Minimum Distance “C” Tolerance
7098 Single .625” .506” .532”
7101 Double 1.625” .506” 1.032”
7103 Triple 2.203” .506” 1.321”
7099 Single .763” .700” .601”
7102 Double 2.638” .700” 1.538”
7104 Triple 3.198” .700” 1.818”
Slot Length +/- .030”
Slot Width +/- .010”
25-7098 Single 15.88mm 12.85mm 13.51mm
25-7101 Double 41.28mm 12.85mm 26.21mm
Slot Length +/- .76mm
40-7099 Single 19.38mm 17.78mm 15.27mm
Slot Width +/- .25mm
40-7102 Double 67.00mm 17.78mm 39.07mm
Economy T-Nut Clearance Designations
Ordering Example: (2) 1010 x 18.000 w/ #7098 in A @ 3.00 and 15.00 from Left End
MACHINING SERVICES
For the most up to date information on 80/20 ® products visit 8020.net
877