catalogo-8020_compressed

Add-On Components
“L” Dynamic Pivot Arm
Part Description:
Fractional 10 Series 15 Series
Metric 25 Series 40 Series
The “L” dynamic pivot arm is commonly used in assemblies to create a dynamic pivot; it provides a longlasting
connection and requires no machining services. The pivot arm can be easily assembled, lending itself
to repositioning and reuse and has a permanently lubricated bronze bushing that acts as high-strength pivot
point. The hardware to mount the pivot arm to the profile is included while the suggested hardware to connect
the pivot arm to the nub can be found below. Tip: Pre-load your hardware prior to connecting profiles to
simplify your assembly and save time.
D
E
J
A
B
C
ø F
G
H
K
M
N
ø L
Part No. Series Color A B C D E F G H J K L M N Weight
4172 Clear 2.000” .500” 1.000” 1.000” .500” .257” .188” .125” .188” 1.000” .312” .500” .505” .079 lb
4172-Black Black 2.000” .500” 1.000” 1.000” .500” .257” .188” .125” .188” 1.000” .312” .500” .505” .079 lb
4343 Clear 3.000” .750” 1.500” 1.500” .750” .328” .250” .312” .250” 1.500” .375” .750” .755” .215 lb
4343-Black Black 3.000” .750” 1.500” 1.500” .750” .328” .250” .312” .250” 1.500” .375” .750” .755” .215 lb
25-4172 Clear 50.00mm 12.50mm 25.00mm 25.00mm 12.50mm 6.23mm 4.00mm 3.00mm 4.00mm 25.00mm 8.00mm 12.50mm 12.50mm .0471 kg
25-4172-Black Black 50.00mm 12.50mm 25.00mm 25.00mm 12.50mm 6.23mm 4.00mm 3.00mm 4.00mm 25.00mm 8.00mm 12.50mm 12.50mm .0471 kg
40-4343 Clear 80.00mm 20.00mm 40.00mm 40.00mm 20.00mm 8.13mm 6.00mm 8.00mm 6.00mm 40.00mm 10.00mm 20.00mm 19.91mm .1002 kg
40-4343-Black Black 80.00mm 20.00mm 40.00mm 40.00mm 20.00mm 8.13mm 6.00mm 8.00mm 6.00mm 40.00mm 10.00mm 20.00mm 19.91mm .1002 kg
Material Specifications
Material Alloy* Finish
Aluminum 6105-T5 Anodize
Bolt
* Or comparable
Included Hardware (Mount Arm to T-Slot)
Part No. Series Qty. Bolt T-Nut
“L” Dynamic Pivot Arm
3414 2 1/4-20 x 1/2” FHSCS
3412 2 5/16-18 x 5/8” FHSCS
75-3541 2 M6 x 10mm FHSCS
75-3508 2 M8 x 16mm FHSCS
Economy
T-Nut
Suggested Hardware (Mount Arm to Nub)
ADD-ON COMPONENTS
Part No. Series Qty. Bolt Assembly
3501 1 5/16 x 1/4” Shoulder Bolt & Thrust Washer
Profile
3500 1 3/8 x 3/8” Shoulder Bolt & Thrust Washer
25-3501 1 6mm x 6mm Shoulder Bolt & Thrust Washer
40-3500 1 10mm x 10mm Shoulder Bolt & Thrust Washer
718
For the most up to date information on 80/20 ® products visit 8020.net