catalogo-8020_compressed

Fastening Methods
Fractional
10 Series
Quick Frame
Quick Frame to 10 Series Transition Tee
Part Description:
The Quick Frame to 10 series transition tee is made of nylon and is used with a Quick Frame profile which
has built-in ridges that bite into the fastener to create tension without the use of additional hardware. It is used
to transition from a 1” x 1” T-slotted profile using only a soft-faced mallet (page 914) to form light-duty yet
sturdy builds. The Quick Frame to 10 series transition tee requires no additional hardware and no machining
services. For information on the mounting hardware for 10 series profiles see below.
B
TYP
A
C
TYP
J
H
K
D
FASTENERS
ø G
F
TYP
E
L
TYP
Part No. Series Material Process Color A B C D E F G H J K L Weight
9330 to Nylon
Injection
Molded
Black 3.000” 1.065” .870” 1.300” .650” .528” .281” 2.425” 1.125” 1.300” 1.000” .077 lb
Suggested Hardware (Mount to T-Slot)
Part No. Series Qty. Bolt T-Nut
3386 2 1/4-20 x 3/8” FBHSCS Slide-In
Bolt
Bolt
Profile
T-Nut
Quick Frame to 10 Series Transition Tee
Profile
442
For the most up to date information on 80/20 ® products visit 8020.net