catalogo-8020_compressed

Index
Glossary
INDEX
0 Degree Dynamic Pivot Nub A connecting block that allows profiles to swing 180 degrees parallel to the mounting profile.
10 Series 80/20’s family of T-slot profiles utilizing 1.0 inch and 0.5 inch centerlines.
15 Series 80/20’s family of T-slot profiles utilizing 1.5 inch and 0.75 inch centerlines.
20 Series 80/20’s family of T-slot profiles utilizing 20mm and 10mm centerlines.
25 Series 80/20’s family of T-slot profiles utilizing 25mm and 12.5mm centerlines.
30 Series 80/20’s family of T-slot profiles utilizing 30mm and 15mm centerlines.
40 Series 80/20’s family of T-slot profiles utilizing 40mm and 20mm centerlines.
45 Series 80/20’s family of T-slot profiles utilizing 45mm and 22.5mm centerlines.
45 Degree Support Precut and assembled profiles with 45° miters that add strength to corner connections.
6105-T5 An aluminum alloy used in many 80/20 profiles. It offers high strength, excellent machinability, and a
great aesthetic finish.
80/20 Builds The project assembly division of 80/20 ® Inc. There are three service levels; preloading, subassembly
and full assembly.
90 Degree Flat Plate A connecting plate used to make right angle connections of T-slot profiles.
90 Degree Dynamic Pivot Nub A connecting block that allows profiles to swing 180 degrees perpendicular to the mounting profile.
ABS Haircell Acrylonitrile Butadiene Styrene: decorative plastic sheet material.
Access Hole A hole specifically located in the T-slots that allow access to tighten an end fastener.
Adjustable Hinge A hinge with adjustable tension between the leaves.
Aesthetic Tasteful, pleasing, or inventive.
Align-a-Groove Shallow grooves running the length of some of 80/20 ® ’s T-slotted profiles that aid in aligning profiles
during assembly.
Aluminum Composite Two thin aluminum sheets bonded together with a corrugated polyallomer core.
Aluminum Extrusion Aluminum bar produced by heating and pressing the aluminum material through a shaped opening in
a die, forming a distinctive profile.
Anchor Fastener A strong and adjustable fastener used to join two T-slotted profiles at right angles.
Anodize A thin, protective electrochemical coating used on aluminum surfaces; can be clear or colored.
ASTM The American Society for Testing Materials: organization that sets testing standards and methods for
materials.
Attitude Our positive, can-do disposition that sets 80/20 ® apart from the rest of the competition.
AutoQuoterX ® II 80/20’s free 64-bit accessible plugin used in conjuction with full versions of AutoCAD ® .
BHSCS Button Head Socket Cap Screw.
Black Chromate A black, corrosion-resistant coating used on some ferrous screw products.
Black Zinc A black, corrosion-resistant coating used on some metal products.
Bolt Assembly A single part number that makes ordering combinations of fasteners easier and faster.
Bushing A removable cylindrical lining for an opening used to limit the size of the opening, resist abrasion, or
serve as a guide.
Butt Fastener Connects profiles end-to-end for a strong, flush connection.
CAD Computer Aided Design or Computer Aided Drafting.
Chamfer To bevel off the right angled edge of a corner.
Cheater Pipe An improvised breaker bar made from a length of pipe and a wrench, used to provide extra torque.
Clear Chromate A clear, corrosion-resistant coating used on some ferrous metal products.
Coefficient of Friction The amount of force between two materials rubbing against each other.
Counterbore A cylindrical, flat-bottomed hole drilled partially through a profile.
954
For the most up to date information on 80/20 ® products visit 8020.net