catalogo-8020_compressed

Fastening Methods
Ready Tube
Extended Tube Insert
Part Description:
The extended tube insert connects Ready Tube profiles together when their lengths are not divisible by 1.50”.
It is also commonly used to add casters and leveling feet and requires no additional machining services when
used in Ready Tube profiles with predrilled holes. See below for information on hardware for the standard tube
insert. Additional Information: For a custom length insert, see the tube insert profile on page 856.
A
B
FASTENERS
G
(THREAD)
E
D
(THREAD)
F
ø C
Part No. Series Material Finish A B C D (Thread) E F G (Thread) Weight
4605
Mill 2.940” 1.225” .332” 5/16-18 .720” 2.000” 5/16-18 .233 lb
4606 Mill 2.940” 1.225” .332” M8 x 1.25 .720” 2.000” M8 x 1.25 .231 lb
4607 Mill 2.940” 1.225” .332” 5/16-18 .720” 2.000” 3/8-16 .227 lb
4608 Aluminum
Mill 2.940” 1.225” .332” M8 x 1.25 .720” 2.000” M10 x 1.5 .224 lb
4609 Mill 2.940” 1.225” .332” 5/16-18 .720” 2.000” 7/16-14 .221 lb
4610 Mill 2.940” 1.225” .332” M8 x 1.25 .720” 2.000” M12 x 1.75 .213 lb
4611 Mill 2.940” 1.225” .332” 5/16-18 .720” 2.000” 1/2-13 .210 lb
Suggested Hardware
Insert Part No. Series Qty. Description
4605, 4607, 3970 1 5/16-18 x 1.75” Flanged Hex Head Bolt Assembly
4609, 4611 3753 1 5/16-18 x 2.00” Flanged Hex Head Bolt
13-3945 1 M8 x 45.00mm BHSCS
4606, 4608,
M8 Flanged Hex Nut
4610 3963 1
M8 x 50.00mm Flanged Hex Head Bolt
OR
Part No.
Description
9760 Roll Pin
420
For the most up to date information on 80/20 ® products visit 8020.net