catalogo-8020_compressed

Panels & Doors
Retainers are easy to use and available in
several sizes and shapes to fit your needs.
Panel Retainers:
• Strong
• Cost-effective
• Corrosion-resistant
• Indoor or Outdoor Use
• Requires drill-through hole in panel
Mesh Retainers:
• Strong
• Cost-effective
• Corrosion-resistant
• Indoor or Outdoor Use
• Includes a backing plate
• No machining required
• Slotted holes for adjustability
Any Thickness Panel
1/4” Thick Panel
Panel Mount Blocks are a great way to mount your panel
either flush with the profile or on the profile surface. They
provide stability while reducing vibration and there are
options available in aluminum or nylon.
PANELS & DOORS
Panel Gasket is a great finishing touch for your project. Use it to help
secure your panel and prevent it from rattling within the frame. Keep
in mind that you only need to put panel gasket on one side of the panel.
Here are a few other tips when using panel gasket:
• If you are having trouble installing the gasket, use a little bit
of automotive vinyl protectant.
• Cut your panel gasket 2-3 inches (50-76mm) longer than the
opening to make the corners stay tight.
• When installing panel gasket, begin in the middle of your panel
and work your way out.
Panel
Gasket wraps firmly
around the lip of the
profile’s T-slot cutting
down on vibration and
noise made by the panel.
For the most up to date information on 80/20 ® products visit 8020.net
449