catalogo-8020_compressed

Panels & Doors
Fractional
10 Series 15 Series Metric
25 Series
40 Series
Machining
Roll-In Panel Mount Bracket
Part Description:
The roll-in panel mount bracket is used to mount a panel flush with a profile and is designed to allow use even
when profiles are captivated. The roll-in panel mount bracket is a fastening method that can be repositioned
and reused. To simplify the assembly use either a drill through or a drill through and a tap (page 905). The
hardware should be based on machining type and panel thickness.
B
G
H
C
A
F
E
ø D
K
J
L
M
PANELS & DOORS
Part No. Series Color A B C D E F G H J K L M Weight
2489 Clear 1.190” .500” .500” .281” 1.000” .855” .457” .130” .356” .240” .573” 1.000” .020 lb
2489-Black Black 1.190” .500” .500” .281” 1.000” .855” .457” .130” .356” .240” .573” 1.000” .020 lb
2488 Clear 1.805” .750” .745” .328” 1.500” 1.305” .610” .130” .476” .304” .782” 1.500” .053 lb
2488-Black Black 1.805” .750” .745” .328” 1.500” 1.305” .610” .130” .476” .304” .782” 1.500” .053 lb
25-2489 Clear 30.23mm 12.70mm 12.70mm 7.10mm 25.40mm 21.72mm 11.61mm 3.30mm 9.04mm 6.10mm 14.55mm 25.40mm .0095 kg
25-2489-Black Black 30.23mm 12.70mm 12.70mm 7.10mm 25.40mm 21.72mm 11.61mm 3.30mm 9.04mm 6.10mm 14.55mm 25.40mm .0095 kg
40-2488 Clear 45.86mm 19.05mm 18.93mm 8.30mm 38.10mm 33.16mm 15.49mm 3.30mm 12.09mm 7.72mm 19.86mm 38.10mm .0240 kg
40-2488-Black Black 45.86mm 19.05mm 18.93mm 8.30mm 38.10mm 33.16mm 15.49mm 3.30mm 12.09mm 7.72mm 19.86mm 38.10mm .0240 kg
Material Specifications
Material Alloy* Finish
Aluminum 6105-T5 Anodize
* Or comparable
Roll-in Panel
Mount Bracket
Required Machining Services
Machining Type Machined Reference Page
Drill Thru Mounting Panel 905
Bolt
Panel
Profile
482
For the most up to date information on 80/20 ® products visit 8020.net