catalogo-8020_compressed

Floor to Frame
Metric 30 Series 45 Series Machining
5 Hole - Die-Cast Center Tap Base Plate
Part Description:
The 5 hole – die-cast center tap base plate has a black powder coat finish. It mounts leveling feet and threaded
stem casters, and is commonly used on profiles with eight slots to center mount the foot or caster. This base plate
can also be used on a profile side. It requires a tap (page 861) to mount to a profile end. Additional Information:
When using an M12 socket head cap screw (SHCS) the base plate can only be mounted to the profile end.
E
D
C
K
A
B
F
L
J
(THREAD)
H
G
Part No. Series Color A B C D E F G H J K L Weight
14035
30.00mm 15.00mm 60.00mm 30.00mm 15.00mm 30.00mm 30.00mm M8 SHCS M8 x 1.25 12.00mm 60.00mm .3710 kg
14037 30.00mm 15.00mm 60.00mm 30.00mm 15.00mm 30.00mm 30.00mm M8 SHCS M10 x 1.50 12.00mm 60.00mm .3520 kg
14039 30.00mm 15.00mm 60.00mm 30.00mm 15.00mm 30.00mm 30.00mm M8 SHCS M12 x 1.75 12.00mm 60.00mm .3470 kg
14041 Black 30.00mm 15.00mm 60.00mm 30.00mm 15.00mm 30.00mm 30.00mm M8 SHCS M16 x 2.0 12.00mm 60.00mm .3390 kg
14043 45.00mm 22.50mm 90.00mm 45.00mm 22.50mm 45.00mm 45.00mm M12 SHCS M10 x 1.50 16.00mm 90.00mm 1.0680 kg
14045 45.00mm 22.50mm 90.00mm 45.00mm 22.50mm 45.00mm 45.00mm M12 SHCS M12 x 1.75 16.00mm 90.00mm 1.0680 kg
14047 45.00mm 22.50mm 90.00mm 45.00mm 22.50mm 45.00mm 45.00mm M12 SHCS M16 x 2.0 16.00mm 90.00mm 1.0380 kg
Material Specifications
Material Grade Process Finish
Zinc GD-ZnAlCU1 Die Cast Powder Coat
FLOOR TO FRAME
Required Machining Services
Machining Type Machined Reference Page
Tap Profile End Mount to Profile End 861
Suggested Hardware (Mount to T-Slot)
Profile
Part No. Series Qty. Bolt T-Nut
75-3595 4 M6 x 16mm SHCS Drop-in
Suggested Hardware (Mount to Profile End)
5 Hole - Die Cast
Center Tap Base Plate
Part No. Series Qty. Bolt
11-8518 4 M8 x 18mm SHCS
11-2525 4 M12 x 25mm LHSCS
Bolt
654
For the most up to date information on 80/20 ® products visit 8020.net