catalogo-8020_compressed

Panels & Doors
Fractional
15 Series Metric
40 Series
4 Hole - Locking Zinc Hinge
Part Description:
The 4 hole - locking zinc hinge is die-cast black powder-coated zinc with a stainless steel pin. It is a higherstrength
hinge that is commonly used to connect doors and plastic panels to T-slot profiles. The 4 hole - locking
zinc hinge features a ratcheting clamp handle for locking the hinge in position. The suggested hardware to
mount the hinge to a T-slot profile can be found below.
B
C
H
J
G
A
K
ø F
E
D
PANELS & DOORS
Part No. Series A B C D E F G H J K Weight
4488 1.771” 3.252” 2.780” 1.574” .827” .323” 1.457” .551” .315” 4.016” .499 lb
40-4488 45.40mm 82.60mm 70.60mm 40.00mm 21.00mm 8.20mm 37.00mm 14.00mm 8.00mm 102.00mm .2280 kg
Material Specifications
Material Grade Finish Process
4-Hole - Locking Zinc Hinge
Zinc Die-Cast Black Powder Coat Die-Casting
Suggested Hardware Per Leaf (Mount to T-Slot)
T-Nut
Series Part No. Qty. Bolt Part No. Qty. T-Nut
3114 2 5/16-18 x 3/4 BHSCS 3203 2 Standard
11-8518 2 M8 x 18mm SHCS 40-1984 2 Standard
Suggested Hardware Per Leaf (Mount to Panel ≤ .250” / 6mm)
Part No. Series Qty. Bolt Hex Nut Washer
3117 2 5/16-18 x 7/8 BHSCS 3214 3260
11-8320 2 M8 x 20mm BHSCS 11-8065 11-6042
Profile
Bolt
554
For the most up to date information on 80/20 ® products visit 8020.net