catalogo-8020_compressed

Index
Glossary
Threaded Stem Swivel Caster A steerable wheel mounted to a frame by means of a threaded rod.
T-Nut A special threaded flat screw nut designed to fit into the T-slot of 80/20 ® profiles.
Transition Bracket A pre-drilled angled bracket designed to connect different series of profiles.
Transition Plate A pre-drilled plate designed to connect different series of profiles.
Triple T-Nut A T-nut with three threaded holes with centerlines that match those of flat plates, used to speed up
assembly.
T-Slot Cover A cover that fits in a T-slot channel to prevent dust and debris build up, cover wires and tubes, and
add a polished look.
T-Slot Designation Chart A diagram to assist in locating machining service points for 80/20 ® T-slotted profiles.
T-Slot Stud A threaded bolt designed so that the bolt head fits into the T-slot of a profile, leaving the threaded end
protruding.
T-Slot An opening extruded into, or machined out of, a solid surface in the shape of a “T,” designed to
capture or hold in place fasteners that can be located anywhere along the surface of the material.
TYP. Typical.
USDA United States Department of Agriculture.
UHMW Ultra High Molecular Weight
UHMW-PE Ultra High Molecular Weight Polyethylene: excellent abrasion-resistant material used for bearing
pads.
Universal Dynamic Pivot Assembly A connecting block assembly that allows mounted profiles to swing 180 degrees parallel to or
perpendicular to the attached T-slot.
Universal Dynamic Pivot Nub A connecting block that allows mounted profiles to swing 180 degrees parallel to or perpendicular to
the attached T-slot.
Wire Duct A one piece, flexible molded nylon duct for containing wires and tubes. Open slots allow for lead offs;
pieces snap together end to end for continuous travel.
Zinc Plating A bright silver or black corrosion-resistant coating used on some metal products.
INDEX
For the most up to date information on 80/20 ® products visit 8020.net
957