catalogo-8020_compressed

Panels & Doors
Fractional
15 Series Metric
40 Series 45 Series
4 Hole - Slotted Locking Zinc Hinge
Part Description:
The 4 hole - slotted locking zinc hinge is die-cast black powder-coated zinc with a stainless steel pin. It
is a higher-strength hinge that is commonly used to connect doors and plastic panels to T-slot profiles.
The hinge has slotted holes to support adjustments and a ratcheting clamp handle for locking the hinge in
position. It also features slot tabs to assist with alignment. The suggested hardware to mount the hinge to
a T-slot profile can be found below.
D
E
C
B
K
J
M
F
H
A
L
G
PANELS & DOORS
N
Part No. Series Max Load A B C D E F G H J K L M N Weight
12085
53.00mm 81.00mm 69.00mm 40.00mm 24.00mm 13.00mm 8.30mm 40.00mm 14.00mm 8.00mm 105.00mm — — .2155 kg
12086
250 Nm /
184 ft-Lbs.
53.00mm 81.60mm 65.00mm 40.00mm 24.00mm 13.00mm 8.30mm 40.00mm 14.00mm 8.00mm 105.00mm 4.50mm 7.80mm .2132 kg
12087 53.00mm 81.00mm 69.00mm 40.00mm 24.00mm 13.00mm 8.30mm 40.00mm 14.00mm 8.00mm 105.00mm 4.50mm 10.00mm .2092 kg
Material Specifications
Material Grade Finish Process
Zinc Die-Cast Black Powder Coat Die-Casting
Suggested Hardware Per Leaf (Mount to T-Slot)
Part No. Series Qty. Bolt T-Nut
3455 2 5/16-18 x 3/4 SHCS Economy
75-3627 2 M8 x 18mm SHCS Slide-in
75-3630 2 M8 x 20mm SHCS Drop-in
T-Nut
4-Hole - Slotted Locking Zinc Hinge
Suggested Hardware Per Leaf (Mount to Panel ≤ .250” / 6mm)
Part No. Series Qty. Bolt Hex Nut Washer
3117 2 5/16-18 x 7/8 BHSCS 3214 3260
11-8320 2 M8 x 20mm BHSCS 11-8065 11-6042
Profile
Bolt
556
For the most up to date information on 80/20 ® products visit 8020.net