catalogo-8020_compressed

Machining Services
Miter Cut Counterbore
Fractional 10 Series 15 Series
Metric
20 Series 25 Series 30 Series 40 Series 45 Series
Part Description:
The miter cut counterbore machining service includes both a drill through and counterbore to create custom
supports with angles ranging from 30 to 60 degrees. This service is for one end of the profile and includes
mounting hardware. Each end receives a counterbore on the mitered face T-slot(s). Additional Information:
When ordering this service, designate which profile end (left, right, or both) requires the counterbore.
45º
ø B
A
C
D
ø E
Part No. Series Applicable Profiles A B C D* E
MACHINING SERVICES
7083 1001, 1001-S, 1002, 1002-S, 1003, 1003-S, 1004, 1004-S, 1010, 1010-S
7079 1020, 1020-S
7074 1030, 1030-S
7082
1501, 1501-LS, 1502, 1502-LS, 1503, 1503-LS, 1504, 1504-LS, 1515,
1515-S, 1515-Lite, 1515-LS, 1515-UL, 1515-ULS
7092 1530, 1530-Lite, 1530-LS, 1530-S, 1530-UL, 1530-ULS
7094 1545, 1545-S, 1545-LS
20-7082 20-2020
20-7092 20-2040
25-7083 25-2501, 25-2502, 25-2503, 25-2504, 25-2525
25-7079 25-2550
25-7074 25-2576
30-7082 30-3001, 30-3002, 30-3003, 30-3004, 30-3030
30-7092 30-3060
40-7082 40-4001, 40-4002, 40-4003, 40-4004, 40-4040, 40-4040-Lite, 40-4040-UL
40-7092 40-4080, 40-4080-Lite, 40-4080-UL, 40-4082-Lite, 40-4083-Lite, 40-4084-Lite, 40-4085-Lite
40-7094 40-4012
45-7082 45-4545, 45-4545-Lite
45-7092 45-4590
1.000” .625” .250” .707” .257”
1.500” .750” .250” 1.061” .328”
20.00mm 12.70mm 6.30mm 14.14mm 5.30mm
25.00mm 15.88mm 6.35mm 17.68mm 6.53mm
30.00mm 19.05mm 6.35mm 21.21mm 8.30mm
40.00mm 19.05mm 6.35mm 28.28mm 8.30mm
45.00mm 19.05mm 6.35mm 31.81mm 8.30mm
*The “D” dimension is for profiles positioned at a 45 degree angle.
Ordering Example: (2) 1515 x 14.00” w/ #7065 @ 45º Left End Per Drawing and #7082 Left End
Included Mounting Hardware
Series Bolt Part No. Bolt Description Qty. T-Nut Part No. T-Nut Description Qty. Washer Part No. Qty.
3067 1/4-20 x 5/8” Black SHCS 1 to 6 3382 Economy 1 to 6 3258 1 to 6
3112 5/16-18 x 3/4” Black SHCS 1 to 6 3278 Economy 1 to 6 3260 1 to 6
11-5512 M5 x 12mm Black SHCS 1 to 4 14122 Slide-In 1 to 4 11-6040 1 to 4
13-6516 M6 x 16mm Blue SHCS 1 to 6 3859 Economy 1 to 6 13-6045 1 to 6
11-8516 M8 x 16mm Black SHCS 1 to 4 13025 Self-Aligning 1 to 4 11-6042 1 to 4
13-8518 M8 x 18mm Blue SHCS 1 to 6 3838 Economy 1 to 6 13-6042 1 to 6
11-8520 M8 x 20mm Black SHCS 1 to 4 13049 Self-Aligning 1 to 4 11-6042 1 to 4
870
For the most up to date information on 80/20 ® products visit 8020.net