catalogo-8020_compressed

Metric
Fractional
Machining Services
Grabber Door Catch / Locking Grabber Handle Panel Milling
Part Description:
The Grabber door catch and Grabber handle milling services are used to add a handle to a plastic panel
or aluminum plate. The Grabber door catch milling provides clearance for the door catch while the Grabber
handle milling service machines a hole to enable quick and simple installation of the handle. See page 576 for
information on the Grabber door catch and page 566 for the locking plastic panel Grabber handle.
Grabber TM Door Catch Panel Milling
Locking Grabber TM Handle Panel Milling
Reference the
Distance From
the Top of Your
Panel to the
Center Line
Reference the
Distance From the
Top of Your Panel
to the Center Line
A
ø B
B
A
6-32
Tap Thru (2)
C
Part No. Series A B C D Cut Tolerance
7313 1.600” 4.750” .313” 1.125” +/- .020”
65-7313 40.60mm 120.70mm 8.00mm 28.60mm +/- .50mm
Part No. Series A B Hole Location Tolerance
7510 2.000” 2.000” +/- .010”
65-7510 50.80mm 50.80mm +/- .25mm
MACHINING SERVICES
For the most up to date information on 80/20 ® products visit 8020.net
897