catalogo-8020_compressed

Quick Frame
Fastening Methods
3 Way - Tee Connector
Part Description:
The 3 way - tee connector is made of nylon and is used with a Quick Frame profile which has built-in ridges
that bite into the fastener to create tension without the use of hardware. It provides flush connections of up to
three Quick Frame profiles using only a soft-faced mallet (page 914) to form light-duty yet sturdy builds. This
fastener can connect two profiles end to end with an additional 90 degree connection and is also commonly
used when transitioning between standard and flanged profiles. The 3 way - tee connector requires no
additional hardware and no machining services. Connecting flanged Quick Frame profiles at a 90 degree
angle requires a 45 degree miter cut (see machining service on page 883) to connect without interference.
A
B
C
TYP
G
FASTENERS
D
TYP
E
F
Part No. Series Material Process Color A B C D E F G Weight
9130
Gray 1.000” 1.050” .870” 1.125” 1.000” 3.250” 2.150” .082 lb
Nylon Injection Molded
9230 Black 1.000” 1.050” .870” 1.125” 1.000” 3.250” 2.150” .082 lb
Profile
Profile
3 Way - Tee Connector
Profile
For the most up to date information on 80/20 ® products visit 8020.net
429