catalogo-8020_compressed

Recommendations

Info

Fastening MethodsQuick Frame60 Degree Hexagon Side and Top ConnectorPart Description:The 60 degree hexagon side and top connector is made of nylon and is used with a Quick Frame profilewhich has built-in ridges that bite into the fastener to create tension without the use of additional hardware.It creates a unique connection perfect for guarding and display applications and can be used with otherconnectors to create an enclosure. The 60 degree hexagon side and top connector provides flushconnections of up to seven Quick Frame profiles using only a soft-faced mallet (page 914) to form light-dutyyet sturdy builds. The top pitch is 20 degrees. It requires no additional hardware and no machining services.FABTYPGHFASTENERSDCTYPEPart No. Series Material Process Color A B C D E F G H Weight9275 NylonInjectionMoldedBlack 2.430” 1.100” .870” 1.430” 120º 2.112” 1.100” 1.012” .136 lbProfileProfile60 Degree Hexagon Side and Top ConnectorProfileProfile440For the most up to date information on 80/20 ® products visit 8020.net
Quick FrameFastening Methods20 Degree Pitch Hexagon ConnectorPart Description:The 20 degree pitch hexagon connector is made of nylon and is used with a Quick Frame profile which hasbuilt-in ridges that bite into the fastener to create tension without the use of additional hardware. It createsa unique connection perfect for guarding and display applications and can be used with other connectors tocreate an enclosure. The 20 degree pitch hexagon connector provides flush connections of up to four QuickFrame profiles using only a soft-faced mallet (page 914) to form light-duty yet sturdy builds. It requires noadditional hardware and no machining services.DTYPACTYPFASTENERSBTYPFETYPPart No. Series Material Process Color A B C D E F Weight9297 Nylon Injection Molded Black 2.375” 60º .870” 1.100” 20º 1.795” .196 lbProfileProfileProfileProfileProfile20 Degree Hexagon Pitch ConnectorProfileProfileFor the most up to date information on 80/20 ® products visit 8020.net441
Page 3 and 4:
Quick Reference Guide to Catalog 23
Page 5 and 6:
T-SLOTALUMINUMV SWhat is 80/20?WELD
Page 7 and 8:
What is 80/20?WHAT IS 80/20?MISSION
Page 9 and 10:
BEFOREMade with 80/20 StuffAFTERWHA
Page 11 and 12:
Made with 80/20 StuffWHAT IS 80/20?
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Made with 80/20 StuffBLACK ANODIZEW
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Peace of MindWHAT IS 80/20?Parts &
Page 33 and 34:
The 80/20 DifferencePeace of MindWH
Page 35 and 36:
Design Assistance:From Concept to C
Page 37 and 38:
Peace of MindSolidWorks ® 2012 - D
Page 39 and 40:
80/20 ® ServicesWHAT IS 80/20?ADVA
Page 41 and 42:
SKETCHDESIGN80/20 ® ServicesCREATE
Page 43 and 44:
CUSTOMIZE YOUR PANELWe have the equ
Page 45 and 46:
80/20 ® ServicesWHAT IS 80/20?STAN
Page 47 and 48:
Shipping ScheduleOrdering Informati
Page 49 and 50:
WarrantyOrdering InformationWHAT IS
Page 51 and 52:
Part No. 1010 1001011002 10031004 1
Page 53 and 54:
T-Slotted Aluminum ProfilesPictoria
Page 55 and 56:
Part No. 1010 1001011002 10031004 1
Page 57 and 58:
T-Slotted Aluminum ProfilesIntroduc
Page 59 and 60:
T-Slotted Aluminum ProfilesProfile
Page 61 and 62:
T-Slotted Aluminum ProfilesPart Num
Page 63 and 64:
T-Slotted Aluminum ProfilesSimple B
Page 65 and 66:
Ready Tube ® ProfilesIntroduction
Page 67 and 68:
Quick Frame ® ProfilesIntroduction
Page 69 and 70:
T-Slotted Aluminum ProfilesT-Slotte
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
PROFILESPRODUCTSELECTORCHOOSE THE R
Page 79 and 80:
10 Series FractionalT-Slotted Alumi
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
15 SeriesFractionalT-Slotted Alumin
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
20 SeriesMetricT-Slotted Aluminum P
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Ready TubeReady Tube ® Profiles1.5
Page 189 and 190:
Ready TubeReady Tube ® Profiles970
Page 191 and 192:
Ready TubeReady Tube ® Profiles972
Page 193 and 194:
Quick FrameQuick Frame ® Profiles1
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Fastening MethodsPictorial Table Of
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Fastening MethodsFastening Method T
Page 211 and 212:
Fastening MethodsT-Nut Types80/20 o
Page 213 and 214:
Fastening Methods®Fasteners 10180/
Page 215 and 216:
Machining 40 Series 30 Series 25 Se
Page 217 and 218:
APart Description:Machining 40 Seri
Page 219 and 220:
Part Description:Machining 40 Serie
Page 221 and 222:
Part Description:Machining 40 Serie
Page 223 and 224:
45 Series 40 Series 30 Series 25 Se
Page 225 and 226:
40 Series Metric 15 SeriesFractiona
Page 227 and 228:
Machining 45 Series 30 Series Metri
Page 229 and 230:
Machining45 SeriesMetricFastening M
Page 231 and 232:
10 Series FractionalFastening Metho
Page 233 and 234:
15 Series FractionalFastening Metho
Page 235 and 236:
40 Series MetricFastening Methods45
Page 237 and 238:
Page 239 and 240:
Trpl T-nutDbl T-nut 45 Series 40 Se
Page 241 and 242:
Trpl T-nutDbl T-nut45 Series 40 Ser
Page 243 and 244:
40 Series 25 Series Metric 15 Serie
Page 245 and 246:
15 Series 10 Series FractionalFaste
Page 247 and 248:
Dbl T-nut 40 Series 25 Series Metri
Page 249 and 250:
Dbl T-nut15 Series 10 Series Fracti
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Dbl T-nut 15 Series FractionalFaste
Page 267 and 268:
Dbl T-nut 40 Series Metric 15 Serie
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Trpl T-nut Dbl T-nut 45 Series 40 S
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Trpl T-nutDbl T-nut45 Series40 Seri
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
30 SeriesMetricFastening Methods2 H
Page 295 and 296:
45 SeriesMetricFastening Methods2 H
Page 297 and 298:
Dbl T-nut40 Series 25 Series Metric
Page 299 and 300:
Dbl T-nut45 Series40 Series 25 Seri
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Machining 40 Series Metric 15 Serie
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Dbl T-nut45 Series 40 Series 30 Ser
Page 333 and 334:
Machining 15 Series 10 Series Fract
Page 335 and 336:
Machining45 Series 40 Series 30 Ser
Page 337 and 338:
Machining40 Series MetricFastening
Page 339 and 340:
40 Series MetricFastening MethodsEc
Page 341 and 342:
Machining45 Series40 Series 30 Seri
Page 343 and 344:
Page 345 and 346:
Dbl T-nut 15 Series FractionalFaste
Page 347 and 348:
Page 349 and 350:
Part Description:Dbl T-nut 40 Serie
Page 351 and 352:
15 Series 10 Series FractionalFaste
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
40 Series30 Series 25 Series Metric
Page 369 and 370:
40 Series Metric 15 Series 10 Serie
Page 371 and 372:
40 Series25 Series MetricFastening
Page 373 and 374:
40 SeriesMetric15 SeriesFractionalF
Page 375 and 376:
45 Series40 Series25 Series20 Serie
Page 377 and 378:
40 Series25 SeriesMetric15 Series10
Page 379 and 380:
40 Series20 SeriesMetric15 SeriesFr
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
45 SeriesMetricFastening MethodsSta
Page 387 and 388:
40 Series 25 SeriesMetric15 Series
Page 389 and 390:
FractionalFastening MethodsButton H
Page 391 and 392: MetricFractionalFastening MethodsBu
Page 393 and 394: 40 SeriesMetricFractionalFastening
Page 395 and 396: MetricFastening MethodsSocket Head
Page 397 and 398: MetricFractionalFastening MethodsLo
Page 399 and 400: 40 Series25 SeriesMetric15 Series10
Page 401 and 402: MetricFractionalFastening MethodsWa
Page 403 and 404: Ready TubeMetricFractionalFastening
Page 405 and 406: 45 Series 40 Series30 Series Metric
Page 407 and 408: 45 Series30 SeriesMetricFastening M
Page 409 and 410: Fastening MethodsBolt Assemblies1/4
Page 411 and 412: Fastening MethodsBolt Assemblies (C
Page 421 and 422: Ready TubeFastening MethodsStandard
Page 423 and 424: Ready TubeFastening MethodsStandard
Page 425 and 426: Ready TubeFastening MethodsRoll Pin
Page 427 and 428: Quick FrameFastening Methods2 Way -
Page 429 and 430: Quick FrameFastening Methods90 Degr
Page 437 and 438: Quick FrameFastening MethodsCaster
Page 441: Quick FrameFastening Methods30 Degr
Page 445 and 446: Panels & DoorsPictorial Table Of Co
Page 447 and 448: Panels & DoorsPictorial Table Of Co
Page 449 and 450: Panels & DoorsIntroduction to Panel
Page 451 and 452: Panels & DoorsRetainers are easy to
Page 453 and 454: Panels & DoorsVariety of Hinge Opti
Page 455 and 456: MetricFractionalPanels & DoorsAR Po
Page 457 and 458: MetricFractionalPanels & DoorsPolyc
Page 459 and 460: MetricFractionalPanels & DoorsABS H
Page 461 and 462: MetricFractionalPanels & DoorsExpan
Page 463 and 464: MetricFractionalPanels & DoorsLite
Page 465 and 466: MetricFractionalPanels & DoorsHDPE
Page 467 and 468: MetricFractionalPanels & DoorsPheno
Page 469 and 470: MetricFractionalPanels & DoorsDiamo
Page 471 and 472: MetricFractionalPanels & DoorsExpan
Page 473 and 474: MetricFractionalPanels & DoorsTherm
Page 475 and 476: 40 Series 25 Series Metric 15 Serie
Page 477 and 478: Machining 40 Series 25 Series Metri
Page 479 and 480: Machining45 Series 40 Series30 Seri
Page 481 and 482: 45 Series 40 Series 30 Series Metri
Page 483 and 484: Part Description:Machining 40 Serie
Page 485 and 486: Ready Tube40 Series Metric 15 Serie
Page 487 and 488: 45 Series 40 Series 30 Series 25 Se
Page 489 and 490: Dbl T-nut Machining 45 Series 40 Se
Page 491 and 492: Machining 40 Series 25 Series Metri
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Quick Frame10 Series FractionalPane
Page 509 and 510:
Quick FramePanels & DoorsStraddle M
Page 511 and 512:
Machining40 Series 25 Series Metric
Page 513 and 514:
Page 515 and 516:
Page 517 and 518:
45 Series 40 Series 25 Series Metri
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
15 Series FractionalPanels & Doors2
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Ready Tube40 Series 25 Series Metri
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
45 Series 30 Series MetricPanels &
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Part Description:40 Series 30 Serie
Page 563 and 564:
Page 565 and 566:
MachiningMetricFractionalPanels & D
Page 567 and 568:
MetricFractionalPanels & DoorsAlumi
Page 569 and 570:
Machining40 Series Metric 15 Series
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
MachiningQuick Frame40 Series 30 Se
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
MetricFractionalPanels & DoorsSlidi
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Floor to FramePictorial Table Of Co
Page 597 and 598:
Floor to FrameBuilding the BaseOnce
Page 599 and 600:
Machining Metric FractionalFloor to
Page 601 and 602:
MetricFractionalFloor to FrameFlang
Page 603 and 604:
Page 605 and 606:
MetricFractionalFloor to FrameDelux
Page 607 and 608:
MetricFractionalFloor to FrameHeavy
Page 609 and 610:
40 Series Metric 15 Series Fraction
Page 611 and 612:
MetricFractionalFloor to FrameLevel
Page 613 and 614:
MachiningFractionalFloor to FrameSt
Page 615 and 616:
MachiningMetricFractionalFloor to F
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
MetricFractionalFloor to FrameSwive
Page 623 and 624:
Page 625 and 626:
Page 627 and 628:
MetricFractionalFloor to FrameWedge
Page 629 and 630:
Page 631 and 632:
45 Series MetricFloor to FrameAlumi
Page 633 and 634:
Dbl T-nutMachining40 Series 25 Seri
Page 635 and 636:
Dbl T-nutMachining40 Series Metric
Page 637 and 638:
Page 639 and 640:
Dbl T-nutMachining40 Series Metric
Page 641 and 642:
Page 643 and 644:
Dbl T-nutMachining40 Series 25 Seri
Page 645 and 646:
Dbl T-nut Machining 40 Series 25 Se
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Add-On ComponentsPictorial Table Of
Page 659 and 660:
Add-On ComponentsPictorial Table Of
Page 661 and 662:
Visit the Channel at youtube.com/80
Page 663 and 664:
Add-On ComponentsUniBearing TM Conc
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
Page 675 and 676:
Page 677 and 678:
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
Page 689 and 690:
Page 691 and 692:
Dbl T-nutPart Description:40 Series
Page 693 and 694:
Dbl T-nutPart Description:40 Series
Page 695 and 696:
Page 697 and 698:
Add-On ComponentsEngineering Specif
Page 699 and 700:
Add-On ComponentsChemical Resistanc
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
MachiningPart Description:40 Series
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Page 713 and 714:
Add-On ComponentsDynamic90ºMovemen
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Page 729 and 730:
15 Series10 SeriesFractionalAdd-On
Page 731 and 732:
Page 733 and 734:
Page 735 and 736:
Page 737 and 738:
Page 739 and 740:
Page 741 and 742:
Page 743 and 744:
Page 745 and 746:
Page 747 and 748:
Page 749 and 750:
Page 751 and 752:
Page 753 and 754:
Add-On ComponentsIntroduction to Pr
Page 755 and 756:
Page 757 and 758:
Page 759 and 760:
Machining15 Series10 SeriesFraction
Page 761 and 762:
Machining15 Series10 SeriesFraction
Page 763 and 764:
Page 765 and 766:
Page 767 and 768:
Ready TubeAdd-On ComponentsP-Tube S
Page 769 and 770:
Introduction to StanchionsAdd-On Co
Page 771 and 772:
Part Description:15 Series10 Series
Page 773 and 774:
Page 775 and 776:
Part Description:15 SeriesFractiona
Page 777 and 778:
15 Series FractionalAdd-On Componen
Page 779 and 780:
Page 781 and 782:
Page 783 and 784:
Part Description:FractionalAdd-On C
Page 785 and 786:
Finishing Your FramePictorial Table
Page 787 and 788:
Finishing Your FrameFinishing Touch
Page 789 and 790:
Page 791 and 792:
Page 793 and 794:
Page 795 and 796:
Page 797 and 798:
Page 799 and 800:
Page 801 and 802:
Page 803 and 804:
Page 805 and 806:
45 Series40 Series 30 Series 25 Ser
Page 807 and 808:
45 Series40 Series 30 Series Metric
Page 809 and 810:
Page 811 and 812:
Page 813 and 814:
Page 815 and 816:
Page 817 and 818:
Page 819 and 820:
Page 821 and 822:
Page 823 and 824:
Page 825 and 826:
MetricFractionalFinishing Your Fram
Page 827 and 828:
Page 829 and 830:
Structural ShapesPictorial Table Of
Page 831 and 832:
FractionalStructural ShapesFlat Sto
Page 833 and 834:
FractionalStructural ShapesBlock Pr
Page 835 and 836:
FractionalStructural ShapesInside C
Page 837 and 838:
FractionalStructural ShapesAluminum
Page 839 and 840:
FractionalStructural ShapesSteel So
Page 841 and 842:
MetricFractionalStructural ShapesAn
Page 843 and 844:
FractionalStructural ShapesDeadbolt
Page 845 and 846:
MetricFractionalStructural ShapesRi
Page 847 and 848:
MetricFractionalStructural ShapesRo
Page 849 and 850:
15 Series10 SeriesFractionalStructu
Page 851 and 852:
Page 853 and 854:
MetricFractionalStructural ShapesDo
Page 855 and 856:
MetricFractionalStructural ShapesDo
Page 857 and 858:
MetricFractionalStructural ShapesPa
Page 859 and 860:
.500”MITERNegative AnglePositive
Page 861 and 862:
Page 863 and 864:
20 Series Metric 15 Series 10 Serie
Page 865 and 866:
Ready Tube45 Series40 Series 30 Ser
Page 867 and 868:
Page 869 and 870:
Page 871 and 872:
Page 873 and 874:
Page 875 and 876:
Page 877 and 878:
Page 879 and 880:
Page 881 and 882:
Page 883 and 884:
15 Series10 SeriesFractionalMachini
Page 885 and 886:
Quick FrameReady TubeFractionalMach
Page 887 and 888:
Page 889 and 890:
MetricFractionalMachining ServicesC
Page 891 and 892:
Page 893 and 894:
Page 895 and 896:
Page 897 and 898:
Page 899 and 900:
MetricFractionalMachining ServicesG
Page 901 and 902:
Page 903 and 904:
Page 905 and 906:
MetricFractionalMachining ServicesP
Page 907 and 908:
MetricFractionalMachining ServicesM
Page 909 and 910:
ToolsPictorial Table Of ContentsBal
Page 911 and 912:
MetricFractionalToolsBall End Power
Page 913 and 914:
Ready TubeMetricFractionalTools“T
Page 915 and 916:
Page 917 and 918:
Ready TubeToolsRoll Pin Punch / Att
Page 919 and 920:
IndexPart Number Index1001.........
Page 921 and 922:
Page 923 and 924:
Page 925 and 926:
Page 927 and 928:
Page 929 and 930:
Page 931 and 932:
Page 933 and 934:
Page 935 and 936:
IndexPart Number Index13028........
Page 937 and 938:
IndexPart Number Index11-6535......
Page 939 and 940:
Page 941 and 942:
Page 943 and 944:
Page 945 and 946:
Page 947 and 948:
Page 949 and 950:
Page 951 and 952:
IndexProduct Type Index3 Hole - Str
Page 953 and 954:
IndexProduct Type IndexSwinging, 51
Page 955 and 956:
IndexProduct Type IndexStructural S
Page 957 and 958:
IndexGlossaryCountersink To chamfer
Page 959 and 960:
IndexGlossaryThreaded Stem Swivel C
Page 961 and 962:
EMAIL YOUR DRAWING CONCEPT TO SERVI
show all

catalogo-8020_compressed

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?