catalogo-8020_compressed

Recommendations

Info

Panels & DoorsReady TubeReady Tube ® Aluminum HandlePart Description:The Ready Tube aluminum handle has a durable, black finish and rigid design that creates a smoothshape. It is corrosion-resistant, lending itself to both indoor and outdoor applications. See below forsuggested mounting hardware.ACBDETHREADPANELS & DOORSPart No. Series Material Alloy Finish A B C D E Weight28881.500” 5.000” .500” 4.500” 5/16-18 .110 lbAluminum 6061-T6 Black Anodize2889 1.500” 6.500” .500” 6.000” 5/16-18 .137 lbSuggested Hardware (Mount to Ready Tube Profile)Part No. Series Qty. Bolt3753 2 5/16-18 x 2.00” Flanged Hex Head BoltProfileBoltReady TubeAluminum Handle562For the most up to date information on 80/20 ® products visit 8020.net
MachiningMetricFractionalPanels & DoorsSteel Door HandlePart Description:The steel door handle is compact and ideal for smaller areas. It is designed to bolt directly to plastic panels.This handle requires a drill-through service for mounting to plastic panels which can be found on page 905. Allof the required mounting hardware is included.ADETHREADCBPart No. Series Material Grade Finish Process Color A B C D E Weight20701.230” 3.300” 2.680” .310” 8-32 x .500 .104 lbSteel Carbon 26D Brushed Formed Chrome65-2070 31.20mm 84.00mm 68.30mm 8.00mm 8-32 x .500 .0470 kgRequired Machining ServicesMachining Type Part Machined Reference PageSteel Door HandlePlastic Panel MillingPanel 905Included Hardware (Mount to 1/4” Panel)PanelPANELS & DOORSPart No. Series Qty. Bolt3024 2 8-32 x 1/2” BHSCSBoltSteel Door HandleFor the most up to date information on 80/20 ® products visit 8020.net563
Page 3 and 4:
Quick Reference Guide to Catalog 23
Page 5 and 6:
T-SLOTALUMINUMV SWhat is 80/20?WELD
Page 7 and 8:
What is 80/20?WHAT IS 80/20?MISSION
Page 9 and 10:
BEFOREMade with 80/20 StuffAFTERWHA
Page 11 and 12:
Made with 80/20 StuffWHAT IS 80/20?
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Made with 80/20 StuffBLACK ANODIZEW
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Peace of MindWHAT IS 80/20?Parts &
Page 33 and 34:
The 80/20 DifferencePeace of MindWH
Page 35 and 36:
Design Assistance:From Concept to C
Page 37 and 38:
Peace of MindSolidWorks ® 2012 - D
Page 39 and 40:
80/20 ® ServicesWHAT IS 80/20?ADVA
Page 41 and 42:
SKETCHDESIGN80/20 ® ServicesCREATE
Page 43 and 44:
CUSTOMIZE YOUR PANELWe have the equ
Page 45 and 46:
80/20 ® ServicesWHAT IS 80/20?STAN
Page 47 and 48:
Shipping ScheduleOrdering Informati
Page 49 and 50:
WarrantyOrdering InformationWHAT IS
Page 51 and 52:
Part No. 1010 1001011002 10031004 1
Page 53 and 54:
T-Slotted Aluminum ProfilesPictoria
Page 55 and 56:
Part No. 1010 1001011002 10031004 1
Page 57 and 58:
T-Slotted Aluminum ProfilesIntroduc
Page 59 and 60:
T-Slotted Aluminum ProfilesProfile
Page 61 and 62:
T-Slotted Aluminum ProfilesPart Num
Page 63 and 64:
T-Slotted Aluminum ProfilesSimple B
Page 65 and 66:
Ready Tube ® ProfilesIntroduction
Page 67 and 68:
Quick Frame ® ProfilesIntroduction
Page 69 and 70:
T-Slotted Aluminum ProfilesT-Slotte
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
PROFILESPRODUCTSELECTORCHOOSE THE R
Page 79 and 80:
10 Series FractionalT-Slotted Alumi
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
15 SeriesFractionalT-Slotted Alumin
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
20 SeriesMetricT-Slotted Aluminum P
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Ready TubeReady Tube ® Profiles1.5
Page 189 and 190:
Ready TubeReady Tube ® Profiles970
Page 191 and 192:
Ready TubeReady Tube ® Profiles972
Page 193 and 194:
Quick FrameQuick Frame ® Profiles1
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Fastening MethodsPictorial Table Of
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Fastening MethodsFastening Method T
Page 211 and 212:
Fastening MethodsT-Nut Types80/20 o
Page 213 and 214:
Fastening Methods®Fasteners 10180/
Page 215 and 216:
Machining 40 Series 30 Series 25 Se
Page 217 and 218:
APart Description:Machining 40 Seri
Page 219 and 220:
Part Description:Machining 40 Serie
Page 221 and 222:
Page 223 and 224:
45 Series 40 Series 30 Series 25 Se
Page 225 and 226:
40 Series Metric 15 SeriesFractiona
Page 227 and 228:
Machining 45 Series 30 Series Metri
Page 229 and 230:
Machining45 SeriesMetricFastening M
Page 231 and 232:
10 Series FractionalFastening Metho
Page 233 and 234:
15 Series FractionalFastening Metho
Page 235 and 236:
40 Series MetricFastening Methods45
Page 237 and 238:
Page 239 and 240:
Trpl T-nutDbl T-nut 45 Series 40 Se
Page 241 and 242:
Trpl T-nutDbl T-nut45 Series 40 Ser
Page 243 and 244:
40 Series 25 Series Metric 15 Serie
Page 245 and 246:
15 Series 10 Series FractionalFaste
Page 247 and 248:
Dbl T-nut 40 Series 25 Series Metri
Page 249 and 250:
Dbl T-nut15 Series 10 Series Fracti
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Dbl T-nut 15 Series FractionalFaste
Page 267 and 268:
Dbl T-nut 40 Series Metric 15 Serie
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Trpl T-nut Dbl T-nut 45 Series 40 S
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Trpl T-nutDbl T-nut45 Series40 Seri
Page 287 and 288:
Page 289 and 290:
40 Series Metric 15 SeriesFractiona
Page 291 and 292:
Page 293 and 294:
30 SeriesMetricFastening Methods2 H
Page 295 and 296:
45 SeriesMetricFastening Methods2 H
Page 297 and 298:
Dbl T-nut40 Series 25 Series Metric
Page 299 and 300:
Dbl T-nut45 Series40 Series 25 Seri
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Machining 40 Series Metric 15 Serie
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Dbl T-nut45 Series 40 Series 30 Ser
Page 333 and 334:
Machining 15 Series 10 Series Fract
Page 335 and 336:
Machining45 Series 40 Series 30 Ser
Page 337 and 338:
Machining40 Series MetricFastening
Page 339 and 340:
40 Series MetricFastening MethodsEc
Page 341 and 342:
Machining45 Series40 Series 30 Seri
Page 343 and 344:
Page 345 and 346:
Dbl T-nut 15 Series FractionalFaste
Page 347 and 348:
Page 349 and 350:
Part Description:Dbl T-nut 40 Serie
Page 351 and 352:
15 Series 10 Series FractionalFaste
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
40 Series30 Series 25 Series Metric
Page 369 and 370:
40 Series Metric 15 Series 10 Serie
Page 371 and 372:
40 Series25 Series MetricFastening
Page 373 and 374:
40 SeriesMetric15 SeriesFractionalF
Page 375 and 376:
45 Series40 Series25 Series20 Serie
Page 377 and 378:
40 Series25 SeriesMetric15 Series10
Page 379 and 380:
40 Series20 SeriesMetric15 SeriesFr
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
45 SeriesMetricFastening MethodsSta
Page 387 and 388:
40 Series 25 SeriesMetric15 Series
Page 389 and 390:
FractionalFastening MethodsButton H
Page 391 and 392:
MetricFractionalFastening MethodsBu
Page 393 and 394:
40 SeriesMetricFractionalFastening
Page 395 and 396:
MetricFastening MethodsSocket Head
Page 397 and 398:
MetricFractionalFastening MethodsLo
Page 399 and 400:
40 Series25 SeriesMetric15 Series10
Page 401 and 402:
MetricFractionalFastening MethodsWa
Page 403 and 404:
Ready TubeMetricFractionalFastening
Page 405 and 406:
45 Series 40 Series30 Series Metric
Page 407 and 408:
45 Series30 SeriesMetricFastening M
Page 409 and 410:
Fastening MethodsBolt Assemblies1/4
Page 411 and 412:
Fastening MethodsBolt Assemblies (C
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Ready TubeFastening MethodsStandard
Page 423 and 424:
Ready TubeFastening MethodsStandard
Page 425 and 426:
Ready TubeFastening MethodsRoll Pin
Page 427 and 428:
Quick FrameFastening Methods2 Way -
Page 429 and 430:
Quick FrameFastening Methods90 Degr
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Quick FrameFastening MethodsCaster
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Panels & DoorsPictorial Table Of Co
Page 447 and 448:
Panels & DoorsPictorial Table Of Co
Page 449 and 450:
Panels & DoorsIntroduction to Panel
Page 451 and 452:
Panels & DoorsRetainers are easy to
Page 453 and 454:
Panels & DoorsVariety of Hinge Opti
Page 455 and 456:
MetricFractionalPanels & DoorsAR Po
Page 457 and 458:
MetricFractionalPanels & DoorsPolyc
Page 459 and 460:
MetricFractionalPanels & DoorsABS H
Page 461 and 462:
MetricFractionalPanels & DoorsExpan
Page 463 and 464:
MetricFractionalPanels & DoorsLite
Page 465 and 466:
MetricFractionalPanels & DoorsHDPE
Page 467 and 468:
MetricFractionalPanels & DoorsPheno
Page 469 and 470:
MetricFractionalPanels & DoorsDiamo
Page 471 and 472:
MetricFractionalPanels & DoorsExpan
Page 473 and 474:
MetricFractionalPanels & DoorsTherm
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
Machining45 Series 40 Series30 Seri
Page 481 and 482:
45 Series 40 Series 30 Series Metri
Page 483 and 484:
Page 485 and 486:
Ready Tube40 Series Metric 15 Serie
Page 487 and 488:
Page 489 and 490:
Dbl T-nut Machining 45 Series 40 Se
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Quick Frame10 Series FractionalPane
Page 509 and 510:
Quick FramePanels & DoorsStraddle M
Page 511 and 512:
Machining40 Series 25 Series Metric
Page 513 and 514: Machining40 Series 25 Series Metric
Page 517 and 518: 45 Series 40 Series 25 Series Metri
Page 519 and 520: 40 Series 25 Series Metric 15 Serie
Page 537 and 538: 45 Series 40 Series 30 Series 25 Se
Page 539 and 540: 15 Series FractionalPanels & Doors2
Page 547 and 548: Ready Tube40 Series 25 Series Metri
Page 553 and 554: 45 Series 30 Series MetricPanels &
Page 555 and 556: 40 Series Metric 15 SeriesFractiona
Page 561 and 562: Part Description:40 Series 30 Serie
Page 563: 45 Series 40 Series 30 Series 25 Se
Page 567 and 568: MetricFractionalPanels & DoorsAlumi
Page 569 and 570: Machining40 Series Metric 15 Series
Page 581 and 582: MachiningQuick Frame40 Series 30 Se
Page 587 and 588: MetricFractionalPanels & DoorsSlidi
Page 595 and 596: Floor to FramePictorial Table Of Co
Page 597 and 598: Floor to FrameBuilding the BaseOnce
Page 599 and 600: Machining Metric FractionalFloor to
Page 601 and 602: MetricFractionalFloor to FrameFlang
Page 605 and 606: MetricFractionalFloor to FrameDelux
Page 607 and 608: MetricFractionalFloor to FrameHeavy
Page 609 and 610: 40 Series Metric 15 Series Fraction
Page 611 and 612: MetricFractionalFloor to FrameLevel
Page 613 and 614: MachiningFractionalFloor to FrameSt
Page 615 and 616:
MachiningMetricFractionalFloor to F
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
MetricFractionalFloor to FrameSwive
Page 623 and 624:
Page 625 and 626:
Page 627 and 628:
MetricFractionalFloor to FrameWedge
Page 629 and 630:
Page 631 and 632:
45 Series MetricFloor to FrameAlumi
Page 633 and 634:
Dbl T-nutMachining40 Series 25 Seri
Page 635 and 636:
Dbl T-nutMachining40 Series Metric
Page 637 and 638:
Page 639 and 640:
Dbl T-nutMachining40 Series Metric
Page 641 and 642:
Page 643 and 644:
Dbl T-nutMachining40 Series 25 Seri
Page 645 and 646:
Dbl T-nut Machining 40 Series 25 Se
Page 647 and 648:
Machining40 Series Metric 15 Series
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Add-On ComponentsPictorial Table Of
Page 659 and 660:
Add-On ComponentsPictorial Table Of
Page 661 and 662:
Visit the Channel at youtube.com/80
Page 663 and 664:
Add-On ComponentsUniBearing TM Conc
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
Page 675 and 676:
Page 677 and 678:
40 Series Metric 15 Series Fraction
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
Page 689 and 690:
Page 691 and 692:
Dbl T-nutPart Description:40 Series
Page 693 and 694:
Dbl T-nutPart Description:40 Series
Page 695 and 696:
Page 697 and 698:
Add-On ComponentsEngineering Specif
Page 699 and 700:
Add-On ComponentsChemical Resistanc
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
MachiningPart Description:40 Series
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Page 713 and 714:
Add-On ComponentsDynamic90ºMovemen
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Page 729 and 730:
15 Series10 SeriesFractionalAdd-On
Page 731 and 732:
Page 733 and 734:
Page 735 and 736:
Page 737 and 738:
Page 739 and 740:
Page 741 and 742:
Page 743 and 744:
Page 745 and 746:
Page 747 and 748:
Page 749 and 750:
Page 751 and 752:
Page 753 and 754:
Add-On ComponentsIntroduction to Pr
Page 755 and 756:
Page 757 and 758:
Page 759 and 760:
Machining15 Series10 SeriesFraction
Page 761 and 762:
Machining15 Series10 SeriesFraction
Page 763 and 764:
Page 765 and 766:
Page 767 and 768:
Ready TubeAdd-On ComponentsP-Tube S
Page 769 and 770:
Introduction to StanchionsAdd-On Co
Page 771 and 772:
Part Description:15 Series10 Series
Page 773 and 774:
Page 775 and 776:
Part Description:15 SeriesFractiona
Page 777 and 778:
15 Series FractionalAdd-On Componen
Page 779 and 780:
Page 781 and 782:
Page 783 and 784:
Part Description:FractionalAdd-On C
Page 785 and 786:
Finishing Your FramePictorial Table
Page 787 and 788:
Finishing Your FrameFinishing Touch
Page 789 and 790:
Page 791 and 792:
Page 793 and 794:
Page 795 and 796:
Page 797 and 798:
Page 799 and 800:
Page 801 and 802:
Page 803 and 804:
Page 805 and 806:
45 Series40 Series 30 Series 25 Ser
Page 807 and 808:
45 Series40 Series 30 Series Metric
Page 809 and 810:
Page 811 and 812:
Page 813 and 814:
Page 815 and 816:
Page 817 and 818:
Page 819 and 820:
Page 821 and 822:
Page 823 and 824:
Page 825 and 826:
MetricFractionalFinishing Your Fram
Page 827 and 828:
Page 829 and 830:
Structural ShapesPictorial Table Of
Page 831 and 832:
FractionalStructural ShapesFlat Sto
Page 833 and 834:
FractionalStructural ShapesBlock Pr
Page 835 and 836:
FractionalStructural ShapesInside C
Page 837 and 838:
FractionalStructural ShapesAluminum
Page 839 and 840:
FractionalStructural ShapesSteel So
Page 841 and 842:
MetricFractionalStructural ShapesAn
Page 843 and 844:
FractionalStructural ShapesDeadbolt
Page 845 and 846:
MetricFractionalStructural ShapesRi
Page 847 and 848:
MetricFractionalStructural ShapesRo
Page 849 and 850:
15 Series10 SeriesFractionalStructu
Page 851 and 852:
Page 853 and 854:
MetricFractionalStructural ShapesDo
Page 855 and 856:
MetricFractionalStructural ShapesDo
Page 857 and 858:
MetricFractionalStructural ShapesPa
Page 859 and 860:
.500”MITERNegative AnglePositive
Page 861 and 862:
Page 863 and 864:
20 Series Metric 15 Series 10 Serie
Page 865 and 866:
Ready Tube45 Series40 Series 30 Ser
Page 867 and 868:
Page 869 and 870:
Page 871 and 872:
Page 873 and 874:
Page 875 and 876:
Page 877 and 878:
Page 879 and 880:
Page 881 and 882:
Page 883 and 884:
15 Series10 SeriesFractionalMachini
Page 885 and 886:
Quick FrameReady TubeFractionalMach
Page 887 and 888:
Page 889 and 890:
MetricFractionalMachining ServicesC
Page 891 and 892:
Page 893 and 894:
Page 895 and 896:
Page 897 and 898:
Page 899 and 900:
MetricFractionalMachining ServicesG
Page 901 and 902:
Page 903 and 904:
Page 905 and 906:
MetricFractionalMachining ServicesP
Page 907 and 908:
MetricFractionalMachining ServicesM
Page 909 and 910:
ToolsPictorial Table Of ContentsBal
Page 911 and 912:
MetricFractionalToolsBall End Power
Page 913 and 914:
Ready TubeMetricFractionalTools“T
Page 915 and 916:
Page 917 and 918:
Ready TubeToolsRoll Pin Punch / Att
Page 919 and 920:
IndexPart Number Index1001.........
Page 921 and 922:
Page 923 and 924:
Page 925 and 926:
Page 927 and 928:
Page 929 and 930:
Page 931 and 932:
Page 933 and 934:
Page 935 and 936:
IndexPart Number Index13028........
Page 937 and 938:
IndexPart Number Index11-6535......
Page 939 and 940:
Page 941 and 942:
Page 943 and 944:
Page 945 and 946:
Page 947 and 948:
Page 949 and 950:
Page 951 and 952:
IndexProduct Type Index3 Hole - Str
Page 953 and 954:
IndexProduct Type IndexSwinging, 51
Page 955 and 956:
IndexProduct Type IndexStructural S
Page 957 and 958:
IndexGlossaryCountersink To chamfer
Page 959 and 960:
IndexGlossaryThreaded Stem Swivel C
Page 961 and 962:
EMAIL YOUR DRAWING CONCEPT TO SERVI
show all

catalogo-8020_compressed

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?