catalogo-8020_compressed

Machining
15 Series
10 Series
Fractional
Add-On Components
Pressure Manifolds (Continued)
3-Hole Pressure Manifold Stopper Plate
The 3-hole pressure manifold stopper plate is commonly used when adding a pressurized substance to a
T-slot profile. It mounts on the profile end to form a secure seal. The suggested mounting hardware and
gasket are included. The maximum allowable pressure is 150 psi (1034.21 kPa).
D
C
F
B
G
A
E
Part No. Series Color A B C D
E
(Bolt Size)
F G Weight
2446 Clear 1.000” .500” 1.000” .500” 1/4 SHCS .490” 3.000” .178 lb
2446-Black Black 1.000” .500” 1.000” .500” 1/4 SHCS .490” 3.000” .178 lb
2161 Clear 1.500” .750” 1.500” .750” 5/16 SHCS .740” 4.500” .540 lb
2161-Black Black 1.500” .750” 1.500” .750” 5/16 SHCS .740” 4.500” .540 lb
Plate Material Specifications
Material Alloy* Finish Process
Aluminum 6105-T5 Anodize Milled
* Or comparable
Gasket
Required Machining Services
Machining Type Machined Reference Page
Tap Profile End Mounting Profile 861
Pressure Manifold
Bolt
Included Hardware (Mount to T-Slot)
Profile
Part No. Series Qty. Bolt
3071 3 1/4-20 x 1” SHCS
3119 3 5/16-18 x 7/8” SHCS
*This is a representation of a pressure manifold.
CONTINUE
For the most up to date information on 80/20 ® products visit 8020.net
757
ADD-ON COMPONENTS