catalogo-8020_compressed

40 Series Metric 15 Series
Fractional
Panels & Doors
4 Hole - Zinc Hinge
Part Description:
The 4 hole - zinc hinge is die-cast black powder-coated zinc with a stainless steel pin. It is a higher-strength
hinge that is commonly used to connect doors and plastic panels to T-slot profiles. The suggested hardware
to mount the hinge to a T-slot profile can be found below.
B
C
G
E
D
A
R. H
ø F
J
Part No. Series A B C D E F G H J Weight
4489 1.771” 1.574” .826” 1.457” .885” .323” .314” .393” .551” .426 lb
40-4489 45.00mm 40.00mm 21.00mm 37.00mm 22.50mm 8.20mm 8.00mm 10.00mm 14.00mm .1940 kg
Material Specifications
Material Grade Finish Process
Zinc Die-Cast Black Powder Coat Die-Casting
Suggested Hardware Per Leaf (Mount to T-Slot)
4-Hole - Zinc Hinge
T-Nut
PANELS & DOORS
Series Part No. Qty. Bolt Part No. Qty. T-Nut
3114 2 5/16-18 x 3/4 BHSCS 3203 2 Standard
11-8518 2 M8 x 18mm SHCS 40-1984 2 Standard
Suggested Hardware Per Leaf (Mount to Panel ≤ .250” / 6mm)
Part No. Series Qty. Bolt Hex Nut Washer
3117 2 5/16-18 x 7/8 BHSCS 3214 3260
11-8320 2 M8 x 20mm BHSCS 11-8065 11-6042
Profile
Bolt
For the most up to date information on 80/20 ® products visit 8020.net
553