catalogo-8020_compressed

Panels & Doors
Fractional
15 Series Metric
40 Series
4 Hole - Adjustable Hinge
Part Description:
The 4 hole - universal, 4 hole - vertical, and 4 hole - horizontal adjustable hinges are die cast zinc with a black
powder coat finish. They are commonly used to connect T-slot profiles. As their names imply, the universal
hinge has both horizontal and vertical slotted holes while the vertical hinge has vertically slotted holes and
the horizontal hinge has horizontally slotted holes. The slotted holes support fastening adjustments.
Universal Vertical Horizontal
B
C
G
B
C
G
B
C
G
PANELS & DOORS
A
ø F
E D
H
A
ø F
E D
H
A
ø F
E D
H
Part No. Series Orientation Max Load A B C D E F G H Weight
12068 Universal
42.00mm 60.00mm 34.00mm 38.00mm 21.15mm 6.50mm 8.50mm 8.00mm .2082 kg
300 Nm /
12069 Vertical 42.00mm 60.00mm 34.00mm 38.00mm 21.00mm 6.00mm 8.50mm 8.00mm .2075 kg
221 ft-Lbs.
12070 Horizontal 42.00mm 60.00mm 34.00mm 38.00mm 21.00mm 6.50mm 8.50mm 8.00mm .2048 kg
Material Specifications
Material Grade Finish Process
Zinc Die-Cast Black Powder Coated Die-Casting
Suggested Hardware Per Leaf (Mount to T-Slot)
4-Hole - Adjustable Hinge
T-Nut
Part No. Series Qty. Bolt T-Nut
75-3628 2 M6 x 18mm FHSCS Drop-In
Suggested Hardware Per Leaf (Mount to Panel ≤ .250” / 6mm)
Profile
Part No. Series Qty. Bolt Hex Nut Washer
75-3589 2 M6 x 20mm FHSCS Yes Yes
Bolt
540
For the most up to date information on 80/20 ® products visit 8020.net