catalogo-8020_compressed

Fastening Methods
Ready Tube
Standard Tube Insert Kit with Roll Pin
Part Description:
The standard tube insert kit with roll pin is used to make strong connections between Ready Tube profiles. It is
comprised of a standard tube insert, one flanged hex head bolts and a roll pin and is used to connect profiles
together when their lengths are divisible by 1.50”. The roll pin provides a smooth, clean finish and eliminates the
use of protruding hardware. The standard tube insert kit with roll pin requires no additional hardware or machining
services. Ready Tube also is available without pre-drilled holes; fastening these profiles will require machining
services. Use a roll pin punch to install this product (page 915).
A
B TYP
D
C
FASTENERS
Part No. Series Material Finish Thread A B C D Weight
4700
Mill 5/16-18 1.500” .138” 3.226” 1.500” .186 lb
Aluminum
4702 Mill M8 x 1.25” 1.500” .138” 3.226” 1.500” .186 lb
Included Hardware
Insert Part No. Series Qty. Description
4600 1 5/16-18 Standard Tube Insert
4700 9760 1 Roll Pin
3753 1 5/16-18 x 2.00” Flanged Hex Head Bolt
4601 1 M8 x 1.25” Standard Tube Insert
4702 9760 1 Roll Pin
13-3753 1 M8 x 50.00mm Flanged Hex Head Bolt
Standard Tube Insert Kit with Roll Pin
1 2 3
422
For the most up to date information on 80/20 ® products visit 8020.net