catalogo-8020_compressed

Machining
40 Series 25 Series Metric 15 Series 10 Series Fractional
Add-On Components
Pressure Manifolds (Continued)
2-Hole Pressure Manifold Stopper Plate
The 2-hole pressure manifold stopper plate is commonly used when adding a pressurized substance to a
T-slot profile. It mounts on the profile end to form a secure seal. The suggested mounting hardware and
gasket are included. The maximum allowable pressure is 150 psi (1034.21 kPa).
C
D
F
B
A
E
G
Part No. Series Color A B C D
E
(Bolt Size)
F G Weight
2341 Clear 1.000” .500” 1.000” .500” 1/4 SHCS .490” 2.000” .120 lb
2341-Black Black 1.000” .500” 1.000” .500” 1/4 SHCS .490” 2.000” .120 lb
2340 Clear 1.500” .750” 1.500” .750” 5/16 SHCS .740” 3.000” .362 lb
2340-Black Black 1.500” .750” 1.500” .750” 5/16 SHCS .740” 3.000” .362 lb
25-2341 Clear 25.00mm 12.50mm 25.00mm 12.50mm M6 SHCS 11.75mm 50.00mm .0499 kg
25-2341-Black Black 25.00mm 12.50mm 25.00mm 12.50mm M6 SHCS 11.75mm 50.00mm .0499 kg
40-2340 Clear 40.00mm 20.00mm 40.00mm 20.00mm M8 SHCS 18.75mm 80.00mm .1787 kg
40-2340-Black Black 40.00mm 20.00mm 40.00mm 20.00mm M8 SHCS 18.75mm 80.00mm .1787 kg
Plate Material Specifications
Material Alloy* Finish Process
Aluminum 6105-T5 Anodize Milled
* Or comparable
Required Machining Services
Machining Type Machined Reference Page
Tap Profile End Mounting Profile 861
Included Hardware (Mount to T-Slot)
Pressure Manifold
T-Nut
Bolt
Part No. Series Qty. Bolt
3071 2 1/4-20 x 1” SHCS
3119 2 5/16-18 x 7/8” SHCS
13-6525 2 M6 x 25mm SHCS
13-8522 2 M8 x 22mm SHCS
For the most up to date information on 80/20 ® products visit 8020.net
Profile
CONTINUE
753
ADD-ON COMPONENTS