catalogo-8020_compressed

Machining
40 Series 25 Series Metric 15 Series 10 Series Fractional
Add-On Components
Pressure Manifolds (Continued)
Pressure Manifold Tap Ready Access Plate
The pressure manifold tap ready access plate is commonly used when adding a pressurized substance to a T-slot
profile. It has a tap-ready access point, mounts to the profile side, and includes an attached O-ring to form a tight
seal. The maximum allowable pressure is 150 psi (1034.21 kPa). The suggested mounting hardware is included.
C
D
H
B
E
A
J
F
G
Part No. Series Color A B C D E
F
(O-Ring Size)
G
(Bolt Size)
H J Weight
2451 Clear 1.000” .500” 1.000” .500” 1.000” 1/2" OD 1/4 SHCS .500” 2.000” .127 lb
2451-Black Black 1.000” .500” 1.000” .500” 1.000” 1/2" OD 1/4 SHCS .500” 2.000” .127 lb
2450 Clear 1.500” .750” 1.500” .750” 1.500” 1" OD 5/16 SHCS .750” 3.000” .397 lb
2450-Black Black 1.500” .750” 1.500” .750” 1.500” 1" OD 5/16 SHCS .750” 3.000” .397 lb
25-2451 Clear 25.00mm 12.50mm 25.00mm 12.50mm 25.00mm 1/2" OD M6 SHCS 12.00mm 50.00mm .0544 kg
25-2451-Black Black 25.00mm 12.50mm 25.00mm 12.50mm 25.00mm 1/2" OD M6 SHCS 12.00mm 50.00mm .0544 kg
40-2450 Clear 40.00mm 20.00mm 40.00mm 20.00mm 40.00mm 1" OD M8 SHCS 19.00mm 80.00mm .1962 kg
40-2450-Black Black 40.00mm 20.00mm 40.00mm 20.00mm 40.00mm 1" OD M8 SHCS 19.00mm 80.00mm .1962 kg
Plate Material Specifications
Material Alloy* Finish Process
Aluminum 6105-T5 Anodize Milled
* Or comparable
Required Machining Services
Machining Type Machined Reference Page
Manifold Access Profile Milling Mounting Profile 879
Included Hardware (Mount to T-Slot)
Pressure Manifold
T-Nut
Bolt
Series Part No. Qty. Bolt Part No. Qty. T-Nut
3062 2 1/4-20 x 1/2” SHCS 3382 2 Economy
3119 2 5-16/18 x 7/8” SHCS 3278 2 Economy
13-6512 2 M6 x 12mm SHCS 3859 2 Economy
13-8522 2 M8 x 22mm SHCS 3838 2 Economy
For the most up to date information on 80/20 ® products visit 8020.net
Profile
*This is a representation of a pressure manifold.
761
ADD-ON COMPONENTS