catalogo-8020_compressed

Dbl T-nut
Machining
40 Series Metric 15 Series
Fractional
Floor to Frame
Heavy-Duty Flange Mount Caster Base Plate
Part Description:
The heavy-duty flange mount caster base plate is made of anodized aluminum to withstand daily use and wear
and tear. It bolts to a profile end or side and is commonly used to mount casters with high load capacities for an
added layer of strength and durability. The heavy-duty flange mount caster base plate requires a tap (page 861)
to mount to the profile end.
B
TYP
C
TYP
D
K
E
A
TYP
F
L
J
TYP
H
G
(THREAD)
Part No. Series A B C D E F G H J K L Weight
2147 3.000” .500” 1.500” .500” 1.250” 5/16 SHCS 3/8-16 5.500” 1.250” .750” 4.000” 1.493 lb
2147-Black 3.000” .500” 1.500” .500” 1.250” 5/16 SHCS 3/8-16 5.500” 1.250” .750” 4.000” 1.493 lb
40-2147 76.20mm 11.90mm 40.00mm 13.00mm 30.00mm M8 SHCS M10 x 1.5 146.00mm 34.90mm 19.00mm 100.00mm .6917 kg
40-2147-Black 76.20mm 11.90mm 40.00mm 13.00mm 30.00mm M8 SHCS M10 x 1.5 146.00mm 34.90mm 19.00mm 100.00mm .6917 kg
Material Specifications
Part No. Material Alloy* Process Finish
2147
Clear Anodize
2147-Black
Black Anodize
Aluminum 6105-T5 Milled
40-2147 Clear Anodize
40-2147-Black
Black Anodize
* Or comparable
Profile
Required Machining Services
Machining Type Machined Reference Page
Tap Profile End Mount to Profile End 861
Suggested Hardware (Mount to T-Slot)
Part No. Series Qty. Bolt T-Nut
Heavy-Duty Flange
Mount Caster Base Plate
T-Nut
FLOOR TO FRAME
3458 4 TO 8 5/16-18 x 7/8” SHCS Economy
75-3430 4 TO 8 M8 x 20mm SHCS (Blue) Economy
Suggested Hardware (Mount to Profile End)
Part No. Series Qty. Bolt
3123 2 TO 4 5/16-18 x 1.25” SHCS
13-8530 2 TO 4 M8 x 30mm SHCS (Blue)
Bolt
For the most up to date information on 80/20 ® products visit 8020.net
633