catalogo-8020_compressed

15 Series
10 Series
Fractional
Add-On Components
Standard 90 Degree Dynamic Pivot Assembly with Straight and “L” Arm
Part Description:
The standard 90 degree dynamic pivot assembly with straight and “L” arm is typically used to create dynamic
pivots that are perpendicular to the mounting profile and have full axial motion ranging from 0-180 degrees.
The assembly includes one 90 degree dynamic pivot nub, one standard straight dynamic pivot arm, and one
“L” dynamic pivot arm. It has permanently lubricated bronze bushings that act as high-strength pivot points
and nylon thrust washers that protect the pivot arms. This assembly offers a high load capacity while ensuring
a long life cycle. The hardware to connect the nub to the profile, the nub to the arms, and the arms to the
profile are all included.
C
A
B
D
E
F
G
H
Part No. Series Nub (Qty.) Arm (Qty.) Color A B C D E F G H Weight
4162 4184 (1) 4185 (1) 4172 (1) Clear 3.448” .500” 1.000” 3.010” 1.000” .500” 1.000” 1.275” .295 lb
4162-Black 4184 (1) 4185 (1) 4172 (1) Black 3.448” .500” 1.000” 3.010” 1.000” .500” 1.000” 1.275” .295 lb
4364 4384 (1) 4385 (1) 4343 (1) Clear 5.074” .750” 1.500” 4.500” 1.500” .750” 1.500” 1.950” .849 lb
4364-Black 4384 (1) 4385 (1) 4343 (1) Black 5.074” .750” 1.500” 4.500” 1.500” .750” 1.500” 1.950” .849 lb
Material Specifications
Material Alloy* Finish
Aluminum 6105-T5 Anodize
* Or comparable
Included Mounting Hardware
T-Nut
Bolt
Nub to Profile Arms to Nub Arms to Profile
Series Part No. Qty. Part No. Qty. Part No. Qty. Part No. Qty.
3306 1 3501 1 3356 1 AND 3414 2
3613 1 3500 1 3355 1 3412 2
Standard 90 Degree
Dynamic Pivot Assy.
Profile
For the most up to date information on 80/20 ® products visit 8020.net
727
ADD-ON COMPONENTS