catalogo-8020_compressed

40 Series Metric 15 Series 10 Series
Fractional
Fastening Methods
Triple Slide-In Economy T-Nut / Economy T-Nut Holding Spring
Part Description:
The triple slide-in economy T-nut is a fastening option that saves time and simplifies the assembly process. It
is especially useful for multiple-hole flat plates. This fastener loads from the profile ends and is available with
options in size and finish. The pilot thread projection adds additional threading for increased strength. For
information on 80/20 screw and bolt offerings for the triple slide-in economy T-nut refer to pages beginning on
387. Tip: Position the pilot projection down in the T-slot to avoid an uneven connection or crashing.
A
B
TYP
E
F
C
D
TYP
FASTENERS
Part No. Series Material Grade Finish A B C D (Thread) E F Weight
3287
Black Zinc 2.450” 1.000” .443” 1/4-20 .050” .144” .025 lb
3900 Bright Zinc 2.450” 1.000” .443” M6 x 1.0 .050” .144” .034 lb
Steel 1010
3285 Black Zinc 3.562” 1.500” .638” 5/16-18 .080” .222” .077 lb
3805 Bright Zinc 3.562” 1.500” .638” M8 x 1.25 .080” .222” .080 lb
Economy T-Nut Holding Spring
The economy T-nut holding spring, available in 15 and 40 series, snaps onto the pilot projection of the 15 and
40 series Style 1 economy T-nut (page 364), double economy slide-in T-nut (page 366), and triple economy
slide in T-nut (page 367). The spring holds the fastener in place, even when the profile is in a vertical position.
Additional Information: Please note that springs are sold in packs of 100.
A
B
ø C
Part No. Series Material Grade A B C Weight
3010 Steel 1215 .240” .313” .022” .022 lb
For the most up to date information on 80/20 ® products visit 8020.net
367