catalogo-8020_compressed

Panels & Doors
Fractional
10 Series 15 Series Metric
25 Series
40 Series
Machining
Standard Sliding Door Glide
Part Description:
The standard sliding door glide has a pad key that slides into a T-slot; it is commonly used to create a top
rail sliding or bi-fold door. The standard sliding door glide bolts onto the profile end and freely rotates as the
door pivots. It is made of UHMW polyethylene and requires no lubrication. A mounting screw is included. For
information on machining services see page 861.
F
A
B
D
E
C
G
H
J
K
L
PANELS & DOORS
Part No. Series A B C D E F G H J K L Weight
2059 .500” 1.000” 1/4-20 .500” 1.000” .470” .920” .250” .500” .200” .110” .016 lb
2051 .750” 1.500” 5/16-18 .750” 1.500” .700” 1.710” .365” .770” .265” .195” .054 lb
25-2059* 12.70mm 25.40mm 1/4-20* 12.70mm 25.40mm 11.94mm 23.37mm 6.35mm 12.70mm 5.08mm 2.79mm .0075 kg
40-2051** 19.05mm 38.10mm 5/16-18** 19.05mm 38.10mm 17.78mm 43.43mm 9.27mm 19.56mm 6.73mm 4.95mm .0200 kg
* Important: The included 1/4-20 screw requires the corresponding metric end tap.
** Important: The included 5/16-18 screw requires the corresponding metric end tap.
Material Specifications
Material Grade Finish Process
UHMW Virgin Natural Extruded
Required Machining Services
Machining Type Machined Reference Page
End Tap Mounting Profile 861
Profile
Standard Sliding Door Glide
Profile
510
For the most up to date information on 80/20 ® products visit 8020.net