catalogo-8020_compressed

Machining
40 Series 25 Series Metric 15 Series 10 Series
Fractional
Panels & Doors
Standard Sliding Door Glide Profile
Part Description:
The standard sliding door glide profile has a pad key that slides into a T-slot; it is commonly used to create
a top rail sliding or bi-fold door. It is ideal when used with the economy sliding door glide as a bottom mount.
The standard sliding door glide bolts onto the profile end and freely rotates as the door pivots. It is made of
UHMW polyethylene and requires no lubrication. The standard length of the glide profile is 145” (3.683M) or
can be cut to length as a standard machining service (page 860).
A
B
C
D°
E
F
G
H
J
Part No. Series A B C D E F G H J Length Weight
6710 1.000” .250” .500” 50º .200” .110” .470” .385” .230” per inch .008 lb / in.
6710-120 1.000” .250” .500” 50º .200” .110” .470” .385” .230” 120.00” 1.020 lb
6710-145 1.000” .250” .500” 50º .200” .110” .470” .385” .230” 145.00” 1.232 lb
6808 1.500” .365” .770” 45º .265” .195” .700” .600” .300” per inch .018 lb / in.
6808-145 1.500” .365” .770” 45º .265” .195” .700” .600” .300” 145.00” 2.711 lb
25-6710 25.40mm 6.35mm 12.70mm 50º 5.08mm 2.79mm 11.94mm 9.78mm 5.84mm per millimeter .0038 kg / mm
40-6808 38.10mm 9.27mm 19.56mm 45º 6.73mm 4.95mm 17.78mm 15.24mm 7.62mm per millimeter .0084 kg / mm
40-6808-3.683M 38.10mm 9.27mm 19.56mm 45º 6.73mm 4.95mm 17.78mm 15.24mm 7.62mm 3683.00mm 1.1698 kg
PANELS & DOORS
Material Specifications
Material Grade Finish Process
UHMW Virgin Natural Extruded
Required Machining Services
Machining Type Machined Reference Page
Cut to Length Door Glide Profile 860
Profile
Standard Sliding Door Glide
Profile
For the most up to date information on 80/20 ® products visit 8020.net
511