catalogo-8020_compressed

Panels & Doors
Fractional
10 Series Metric
20 Series 25 Series 30 Series
4 Hole - Economy Zinc Hinge
Part Description:
The 4 hole - economy zinc hinge is made of die-cast zinc with a black powder coat finish. It is a higherstrength
hinge that is commonly used to connect doors and plastic panels to T-slot profiles. The suggested
hardware to mount the hinge to a T-slot profile can be found below.
B
C
G
E
D
A
ø F
H
PANELS & DOORS
Part No. Series Max Load A B C D E F G H Weight
12255 50 Nm / 36.8 ft-Lbs. 25.00mm 40.00mm 25.00mm 20.00mm 12.50mm 5.20mm 5.50mm 5.00mm .0465 kg
12256 50 Nm / 36.8 ft-Lbs. 30.00mm 50.00mm 30.00mm 25.00mm 15.00mm 6.30mm 6.50mm 6.00mm .0920 kg
12062 60 Nm / 44.0 ft-Lbs. 36.00mm 60.00mm 36.00mm 30.00mm 18.00mm 8.30mm 8.00mm 8.00mm .1153 kg
Material Specifications
Material Grade Finish Process
4-Hole - Economy Zinc Hinge
Zinc Die-Cast Black Powder Coat Die-Casting
T-Nut
Suggested Hardware Per Leaf (Mount to T-Slot)
Part No. Series Qty. Bolt T-Nut
3414 2 1/4-20 x 1/2 FHSCS Economy
75-3572 2 M5 x 10mm FHSCS Economy
75-3584 2 M6 x 14mm FHSCS Slide-in
75-3585 2 M6 x 14mm FHSCS Drop-in
Suggested Hardware Per Leaf (Mount to Panel ≤ .250” / 6mm)
Part No. Series Qty. Bolt Hex Nut Washer
11-5716 2 M5 x 16mm FHSCS 11-5065 11-6040
11-6718 2 M6 x 18mm FHSCS 11-6065 11-6041
11-8716 2 M8 x 18mm FHSCS 11-8065 11-6042
Profile
Bolt
550
For the most up to date information on 80/20 ® products visit 8020.net