catalogo-8020_compressed

Machining Services
Panel Retainer Milling
Part Description:
Fractional 10 Series 15 Series
Metric 20 Series 25 Series 30 Series 40 Series 45 Series
The panel retainer milling service provides through holes for mounting a single arm narrow or wide retainer to
plastic panels. See pages 484-487 for information on single arm panel retainers.
Single Arm Narrow Panel Retainer
A
Reference the Distance
From the Top of Your
Panel to the Center Line
B
Drill Thru
MACHINING SERVICES
Part No. Series Retainer Part No. A B Hole Location Tolerance
7593 2496 / 2512 .868” .313”
7595 2434 / 2515 1.290” .375”
20-7593 20-2496 16.80mm 6.15mm
25-7593 25-2496 / 25-2512 22.50mm 7.92mm
30-7595 30-2434 24.80mm 9.52mm
40-7595 40-2434 / 40-2515 35.50mm 9.52mm
45-7595 45-2434 37.80mm 9.52mm
Single Arm Wide Panel Retainer
A
B
Reference the
Distance From
the Top of Your
Panel to the
Center Line
+/- .010”
+/- .25mm
C
Drill Thru (2)
Part No. Series Retainer Part No. A B C Hole Location Tolerance
7594 2497 / 2513 1.000” .868” .313”
7596 2433 / 2516 1.500” 1.290” .375”
+/- .010”
20-7594 20-2497 20.00mm 16.80mm 6.15mm
25-7594 25-2497 / 25-2513 25.40mm 22.50mm 7.92mm
30-7596 30-2433 30.00mm 24.80mm 9.52mm
+/- .25mm
40-7596 40-2433 / 40-2516 38.10mm 35.50mm 9.52mm
45-7596 45-2433 45.00mm 37.80mm 9.52mm
902
For the most up to date information on 80/20 ® products visit 8020.net