catalogo-8020_compressed

Machining Services
Fractional 10 Series 15 Series
Metric 20 Series 25 Series 30 Series 40 Series 45 Series
Top Mount Milling for Plastic Panel or Aluminum Plate
Part Description:
The top mount milling for plastic panels or aluminum plates provides clearance to mount the panel or
plate to the face of a profile. This is commonly used for shelves, tabletops, and material handling carts.
Additional Information: The thickness of the panel or plate must be .250” (6mm) or thicker.
A
Reference the Distance
From the Top of Your
Panel to the Center Line
MACHINING SERVICES
Part No. Series Service Type A Hole Location Tolerance
7507 Drill Thru 0.281” Panel 1/2” from Edge .500”
7509 Drill Thru & Countersink for 1/4” FHSCS - 1/2” from Edge .500”
7508 Drill Thru 0.328” Panel 3/4” from Edge .750”
+/- .010”
7511 Drill Thru & Countersink for 5/16” FHSCS - 3/4” from Edge .750”
7512 Drill Thru & Countersink for 1/4” FHSCS - 3/4” from Edge .750”
20-7507 Drill Thru 5.56mm Panel 10.00mm from Edge 10.00mm
20-7509 Drill Thru & Countersink for M5 FHSCS - 10.00mm from Edge 10.00mm
25-7507 Drill Thru 7.14mm Panel 12.50mm from Edge 12.50mm
25-7509 Drill Thru & Countersink for M6 FHSCS - 12.50mm from Edge 12.50mm
30-7508 Drill Thru 8.33mm Panel 15.00mm from Edge 15.00mm
30-7511 Drill Thru & Countersink for M8 FHSCS - 15.00mm from Edge 15.00mm
30-7512 Drill Thru & Countersink for M6 FHSCS - 15.00mm from Edge 15.00mm
+/- .25mm
40-7508 Drill Thru 8.33mm Panel 20.00mm from Edge 20.00mm
40-7511 Drill Thru & Countersink for M8 FHSCS - 20.00mm from Edge 20.00mm
40-7512 Drill Thru & Countersink for M6 FHSCS - 20.00mm from Edge 20.00mm
45-7508 Drill Thru 8.33mm Panel 22.50mm from Edge 22.50mm
45-7511 Drill Thru & Countersink for M8 FHSCS - 22.50mm from Edge 22.50mm
45-7512 Drill Thru & Countersink for M6 FHSCS - 22.50mm from Edge 22.50mm
904
For the most up to date information on 80/20 ® products visit 8020.net