catalogo-8020_compressed

Ready Tube
Fastening Methods
Standard Tube Insert
Part Description:
The standard tube insert is used to make strong connections between Ready Tube profiles. It connects
profiles together when their lengths are divisible by 1.50”. The standard tube insert requires no additional
machining services when used in Ready Tube profiles with predrilled holes. See below for information on
hardware for the standard tube insert. Additional Information: For a custom length insert, see the tube insert
profile on page 856.
B
TYP
A
TYP
C
G
F
D
TYP
ø E
TAP
THRU
H
FASTENERS
Part No. Series Material Finish A B C D E (Thread) F G H Weight
4600
1.225” .382” .459” .613” 5/16-18 1.380” .690” .332” .108 lb
4615 1.225” .382” .459” .613” 5/16-18 1.440” .720” 5/16-18 .112 lb
Aluminum Mill
4601 1.225” .382” .459” .613” M8 x 1.25 1.440” .720” .332” .112 lb
4616 1.225” .382” .459” .613” M8 x 1.25 1.440” .720” M8 x 1.25 .112 lb
Suggested Hardware
Insert Part No. Series Qty. Description
4600
3970 1 5/16-18 x 1.75” Flanged Hex Head Bolt Assembly
3753 1 5/16-18 x 2.00” Flanged Hex Head Bolt
4615
3750 1 5/16-18 x 1.25” Flanged Hex Head Bolt
3753 1 5/16-18 x 2.00” Flanged Hex Head Bolt
4601
3963 1 M8 x 50.00mm Flanged Hex Head Bolt Assembly
13-3753 1 M8 x 50.00mm Flanged Hex Head Bolt
4616
13-3943 1 M8 x 30.00mm BHSCS
13-3945 1 M8 x 45.00mm BHSCS
Standard Tube Insert Kit with Hex Nut
1 2 3
For the most up to date information on 80/20 ® products visit 8020.net
419