PhotoPlus X2 User Guide - Serif

To create a new category:
1. Display the Macros tab.
Macros and Batch Processing 177
2. Click the New Category button at the bottom of the Macros tab.
3. In the dialog, enter a new category name and click OK. The new empty
category is displayed automatically.
Any currently displayed category can be edited or deleted via the Tab
Menu button at the top right of the Macros tab.
To record a macro:
1. In the Macros tab, select a category from the drop-down list of category
names.
2. Click the New Macro button at the bottom of the Macros tab to provide
a macro name in advance of recording your macro. The macro name appears
at the bottom of the list of macros in the currently displayed category.
3. Select the Start Recording button. Any command that can be saved in a
macro will be stored while recording is in progress.
4. Carry out the command sequence you want to record, following the
instructions when necessary.
5. Stop recording your macro with the Stop Recording button!
To view the macro, navigate to the correct category, then click on the icon to
expand the entry to show the command list recorded by the macro.