PhotoPlus X2 User Guide - Serif

178 Macros and Batch Processing
Playing Macros
To play a macro you need to choose a photo to which you want to apply your
recorded or pre-recorded macro. Any macro needs to be played to repeat the
recorded commands.
To play a macro:
1. Open the photo you wish to apply the macro to.
2. From the Macros tab, choose a category from the drop-down menu, then
select your macro.
3. Choose the Play button in the Macros tab to play the macro.
Abort any macro playback at any time with the ESC key.
Modifying Macros
Once you’ve recorded
and played back your
macro it's possible to
modify the macro’s saved
sequence of commands.
These are listed in the
order they were recorded
and may be enabled,
disabled, reordered or
made interactive "on the
fly". Macro commands
are enabled by default.
It is also possible to perform a right-click to delete, rename or duplicate a
command from the flyout menu. In the command list, the command order can be
rearranged by simple drag and drop of any command into a new position.
Any changes made will be applied to the macro immediately such that no file
saving is required.