PhotoPlus X2 User Guide - Serif

More documents

Recommendations

Info

60 Manipulating Images Flipping and rotating Flipping and rotating are standard manipulations that you can carry out on the whole image, the active layer, a path, or just on a selection. Flips are used to change the direction of a subject's gaze, fix composition, and so on, whereas rotation is an orientation tool for general purpose use. Flip Horizontal Flip Vertical Rotate 15° anti-clockwise Rotate 10° clockwise To flip: • Choose either Flip Horizontally or Flip Vertically from the Image menu, then select Image, Layer, Selection or Path from the submenu.
To rotate: 1. Choose Rotate from the Image menu. Manipulating Images 61 2. From the flyout menu, select an option based on the object (Image, Layer, or Selection), rotation angle (90º or 180º), and the direction (Clockwise or Anticlockwise) required. 3. You can also select Custom..., to display a Rotate dialog, from which you can do the above but instead set your own custom angle, even down to fractional degrees. Straightening a photo As an image adjustment, the Straighten Tool can be used to align a crooked image back to horizontal (e.g., restoring proper horizontal alignment in a scanned image that wasn't aligned correctly on the scanner). Use the tool to trace a new horizon line against a line in the image—the image automatically orients itself to the drawn horizon line. Before (horizon line drawn by dragging) To straighten: After 1. Choose the Straighten Tool from the Crop Tools flyout on the Tools Toolbar. On the Context toolbar, the Canvas drop-down list lets you choose how your straightened image will be displayed: • Crop - Crops and adjusts the straightened image so that it displays on the largest possible canvas size, without displaying any border. • Expand to Fit - Increases the canvas size to display the entire straightened image. The border area is filled with the current background colour.
Page 2 and 3:
How to Contact Us Our main office T
Page 5 and 6:
Contents 1. Welcome................
Page 7 and 8:
Changing image size ...............
Page 9 and 10:
8. Creating Animations ............
Page 11 and 12:
1 Welcome
Page 13 and 14:
Welcome to PhotoPlus X2 Welcome to
Page 15 and 16:
Productivity Welcome to PhotoPlus X
Page 17 and 18:
Welcome to PhotoPlus X2 7 • Uniqu
Page 19 and 20: Welcome to PhotoPlus X2 9 • Image
Page 21 and 22: Welcome to PhotoPlus X2 11 • Macr
Page 23 and 24: Installation System Requirements Mi
Page 25 and 26: 2 Getting Started
Page 27 and 28: Startup Wizard Once PhotoPlus has b
Page 29 and 30: Getting Started 19 4. Select a back
Page 31 and 32: Getting Started 21 Recently viewed
Page 33 and 34: Screen capture Getting Started 23 I
Page 35 and 36: To use the image browser: 1. Choose
Page 37 and 38: To close all image windows (files):
Page 39 and 40: 3 Understanding the Workspace
Page 41 and 42: Visual Reference Understanding the
Page 43 and 44: Understanding the Workspace 33 sepa
Page 45 and 46: Understanding the Workspace 35 To m
Page 47 and 48: Understanding the Workspace 37 3. C
Page 49 and 50: Understanding the Workspace 39 To m
Page 51 and 52: 4 Manipulating Images
Page 53 and 54: Making a selection Manipulating Ima
Page 55 and 56: Manipulating Images 45 The Adjustab
Page 57 and 58: Manipulating Images 47 For Rectangl
Page 59 and 60: Storing selections Manipulating Ima
Page 61 and 62: Manipulating Images 51 • Grow and
Page 63 and 64: Manipulating a selection Manipulati
Page 65 and 66: Manipulating Images 55 • To dupli
Page 67 and 68: Cropping an image Manipulating Imag
Page 69: Manipulating Images 59 Moving and r
Page 73 and 74: Mesh warping Manipulating Images 63
Page 75 and 76: Manipulating Images 65 • To move
Page 77 and 78: Extracting part of an image Manipul
Page 79 and 80: Manipulating Images 69 The composit
Page 81 and 82: 5 Painting and Drawing
Page 83 and 84: Choosing colours Painting and Drawi
Page 85 and 86: Painting and Drawing 75 To swap for
Page 87 and 88: The Brush Tip tab hosts a comprehen
Page 89 and 90: Painting and Drawing 79 Note that t
Page 91 and 92: To erase with the Standard Eraser:
Page 93 and 94: To paint with a pattern: Painting a
Page 95 and 96: Painting and Drawing 85 A pattern c
Page 97 and 98: Painting and Drawing 87 On standard
Page 99 and 100: Painting and Drawing 89 When retouc
Page 101 and 102: To create new solid text: Painting
Page 103 and 104: Adjusting character size and positi
Page 105 and 106: Painting and Drawing 95 Intersect
Page 107 and 108: Painting and Drawing 97 To edit a Q
Page 109 and 110: Painting and Drawing 99 • Release
Page 111 and 112: Creating outlines Painting and Draw
Page 113 and 114: To switch off the layer effect: Pai
Page 115 and 116: Painting and Drawing 105 You can al
Page 117 and 118: 6 Image Adjustments and Effects
Page 119 and 120: Image adjustments Image Adjustments
Page 121 and 122:
Image Adjustments and Effects 111 H
Page 123 and 124:
Using QuickFix Studio Image Adjustm
Page 125 and 126:
Image Adjustments and Effects 115
Page 127 and 128:
Image Adjustments and Effects 117 4
Page 129 and 130:
Image Adjustments and Effects 119
Page 131 and 132:
Overview Image Adjustments and Effe
Page 133 and 134:
Image Adjustments and Effects 123 I
Page 135 and 136:
Image Adjustments and Effects 125 T
Page 137 and 138:
To check or change the plug-in filt
Page 139 and 140:
7 Layers and Masks
Page 141 and 142:
Basics of using layers Layers and M
Page 143 and 144:
Layers and Masks 133 • Suppose yo
Page 145 and 146:
Layers and Masks 135 • Use lock b
Page 147 and 148:
Layers and Masks 137 In reality a g
Page 149 and 150:
Layers and Masks 139 • Negative I
Page 151 and 152:
Using blend modes Layers and Masks
Page 153 and 154:
Layers and Masks 143 selector. In t
Page 155 and 156:
Using depth maps Layers and Masks 1
Page 157 and 158:
Layers and Masks 147 While working
Page 159 and 160:
Creating the mask Before you can us
Page 161 and 162:
To view the active layer's mask: La
Page 163 and 164:
8 Creating Animations
Page 165 and 166:
Getting started with animation Crea
Page 167 and 168:
Creating Animations 157 When you cr
Page 169 and 170:
To speed up the animation process:
Page 171 and 172:
Applying animation effects Creating
Page 173 and 174:
9 Making Images for the Web
Page 175 and 176:
Image formats for the web Making Im
Page 177 and 178:
.PNG format Making Images for the W
Page 179 and 180:
To export a sliced image: Making Im
Page 181 and 182:
Making Images for the Web 171 The o
Page 183 and 184:
10 Macros and Batch Processing
Page 185 and 186:
Understanding macros Macros and Bat
Page 187 and 188:
To create a new category: 1. Displa
Page 189 and 190:
Macros and Batch Processing 179 It
Page 191 and 192:
Macros and Batch Processing 181 If
Page 193 and 194:
Using macros Macros and Batch Proce
Page 195 and 196:
11 Printing and Exporting
Page 197 and 198:
Printing Printing and Exporting 187
Page 199 and 200:
Printing and Exporting 189 • Chec
Page 201 and 202:
Publishing a PDF file Printing and
Page 203 and 204:
Exporting to another file format Pr
Page 205 and 206:
To open the Export Optimizer: 1. Ch
Page 207 and 208:
Index
Page 209 and 210:
2D layer effects, 118 3D layer effe
Page 211 and 212:
feathering, 51 features (new), 3 fi
Page 213 and 214:
Print Multiple command, 190 printin
Page 215 and 216:
Tool Presets tab, 5, 36 Tool proper
Page 217 and 218:
Notes
Page 219 and 220:
Notes
Page 221 and 222:
Notes
Page 223 and 224:
Notes
show all

PhotoPlus X2 User Guide - Serif

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?