3980xpi Users Manual - Data I/O Corporation

View
Delete
Commands
5. If you selected a manufacturer in step 4, a list of devices made by the
selected manufacturer is displayed. Type the number next to the device
you want to add to your Custom Menu, then press ENTER to add the device.
(Press CTRL+N to see the next page of devices.)
6. If prompted, insert the Algorithm/System disk that contains the algorithm
you wish to add. (If the correct disk is not inserted, the programmer will
prompt you for the disk to insert when it is needed.)
If you get the message Cannot access file_name.sys, the
programmer could not find a system file on the disk inserted into the
programmer's drive. Insert the Algorithm/System disk that contains the
file. For instance, if the programmer could not access the file
mem_alg.sys, which contains memory device algorithms, insert the
Memory algorithms disk.
7. Select additional devices from the current screen (or press F2 to return to
the manufacturer list if you were selecting devices from a manufacturers
list). Repeat steps 4 through 6 as necessary.
When you are done adding devices, press F2 once or twice until you are
prompted to insert the Custom Menu disk.
8. Insert the Custom Menu disk and press ENTER to save your changes to disk.
More Commands/Configure System/Custom Menu Algorithms/View
This command displays the contents of a Custom Menu. To view a Custom
Menu, follow these steps:
1. Select the View command.
2. Insert the disk that contains your Custom Menu, then press ENTER to
continue. Follow the directions on the screen (inserting disks if prompted).
3. When you are done, press F2 to return to the Custom Menu Algs menu.
More Commands/Configure System/Custom Menu Algorithms/Delete
This command allows you to delete devices from a Custom Menu, as described
below:
1. Select the Delete command.
2. Insert the disk that contains your Custom Menu, then press ENTER to
continue. Follow the directions on the screen (inserting disks if prompted).
3. The Custom Menu is displayed. Move the cursor to the Delete field and
enter the number next to the file you want to delete.
4. Move the cursor to the Are you sure field and press Y.
CAUTION: If you do not want to delete the file, do not press Enter.
Instead, press F2 to return to the Custom Menu Algs menu.
5. To delete the file, press ENTER.
6. When you are done, press F2 to return to the Custom Menu Algs menu.
3980xpi/3980/3900/2900 User Manual 4-37