3980xpi Users Manual - Data I/O Corporation

RTE init err
Messages
The programmer experienced an error it cannot recover from. Turn off the
programmer and reboot the system. If the error recurs, contact Data I/O
Customer Support.
Saving data to file.
Data are being written to a file on disk.
Saving parameters
The programmer is saving the selected variables onto the disk.
Saving job file.
The programmer is saving a job file.
Search pattern not found
You specified a data pattern for a file that does not contain that pattern. This
message appears while the programmer is in the memory editor or in the under/
overblow display.
Security fuse violation. Hit return to continue, ^Z to abort
You tried to program an EE device with the security fuse already blown. If you
continue by pressing ENTER, the program operation will be performed and previous
data in the device will be overwritten.
System error. Please contact Data I/O.
Contact Data I/O Customer Support.
System parameters restored.
The configuration file from the Restore System Parameters screen was restored.
System parameters saved.
The programmer saved the set of system parameters.
Task error
Testing
The programmer has experienced an error that it cannot recover from; turn the
programmer off and reboot the system. If the error recurs, contact
Data I/O Customer Support.
A self-test is in progress.
TEST HALTED: Socket not empty, hit return to continue, ^Z to abort.
The self-test you are trying to run requires that no devices are in the device
socket. Remove the socketed part and retry the operation, or type CTRL+Z to
cancel the operation.
CAUTION: If you press the carriage return key, the programmer will run
the test and the socketed device could be damaged.
Transferring data.
This message appears while a data transfer operation is being performed.
[transparent mode]
The programmer entered transparent mode. To exit, type ESC CTRL+T.
3980xpi/3980/3900/2900 User Manual 6-9