3980xpi Users Manual - Data I/O Corporation

Setting Up
Cleaning Procedure
1. Blow filtered, compressed air across the SPA block (see Figure 2-21).
Figure 2-21. SPA Block and Base
BASE
SPA BLOCK
2. Mildly dampen a small section of a lint-free cloth with a DeoxIT pen
(Data I/O P/N 570-5500-901) and gently rub the dampened cloth across
all the pins on the SPA block.
3. Using a clean section of the lint-free cloth, gently wipe the surface again.
4. To check that the pins spring up to their normal upright position, push a
base down on the SPA pins a few times.
5. Clean all surfaces of the Base using filtered compressed air and a lint-free
cloth dampened with DeoxIT, if needed.
2-34 3980xpi/3980/3900/2900 User Manual
2803-2