3980xpi Users Manual - Data I/O Corporation
3980xpi Users Manual - Data I/O Corporation
3980xpi Users Manual - Data I/O Corporation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Messages<br />
Disk duplication overwrites user RAM. Hit Return to continue, ^Z to abort.<br />
The duplicate disk operation uses User RAM as a buffer. Anything already in User<br />
RAM will be overwritten. If you don't want to overwrite User RAM, press CTRL+Z to<br />
halt the disk duplication. Press ENTER to proceed with the operation.<br />
Disk error, terminal type not saved!<br />
You tried to save the terminal type as one of the powerup parameters, but the disk<br />
is either full or is defective.<br />
Disk open error. Type ESC and Control W to reboot.<br />
You tried to boot the programmer without the Boot disk in the disk drive. Insert the<br />
Boot disk in the disk drive and reboot the programmer.<br />
Disk write-protected, terminal type not saved!<br />
Done.<br />
You tried to save the terminal type as one of the powerup parameters, but the disk<br />
is write-protected. Move the write-protect slide so the hole through the disk is<br />
blocked.<br />
Done. Bytes copied = nnnnnn<br />
The operation is completed. Proceed to the next operation you want to perform.<br />
This message is displayed after the Copy File operation is complete. It displays the<br />
size of the file that was copied in hexadecimal bytes. Proceed to the next operation<br />
you want to perform.<br />
Electronic ID verify error. Device = hhhhhh<br />
See page 6-16.<br />
End of file<br />
You are viewing the last block of data using the memory editor, vector editor, fuse<br />
editor, or the over/under blow feature.<br />
Fatal system err<br />
The programmer experienced an error it cannot recover from. Turn off the<br />
programmer and reboot the system. If the error recurs, contact <strong>Data</strong> I/O<br />
Customer Support.<br />
FILE ERROR: Can't reach track 0.<br />
A fatal disk error occurred. The disk drive may be faulty. Contact <strong>Data</strong> I/O<br />
Customer Support.<br />
FILE ERROR: Error in sector preamble.<br />
The programmer detected an error with the format of a disk. Use a different disk or<br />
reformat the existing disk and try the operation again.<br />
FILE ERROR: No disk in drive.<br />
The programmer tried to access a disk file, but the disk drive is empty. Insert the<br />
disk with the file to be used.<br />
6-4 <strong>3980xpi</strong>/3980/3900/2900 User <strong>Manual</strong>