3980xpi Users Manual - Data I/O Corporation

For TaskLink for DOS:
1. From the TaskLink directory,
type tl as (simulation mode),
then press ENTER.
(To run TaskLink when you want
to actually program a device,
type tl a, then press ENTER.)
2. From the Setup menu, select
Select Device.
3. Scroll through the list until the
manufacturer of the device you
want to use is highlighted, then
click OK.
4. Scroll through the list of device
part numbers until the one you
want is highlighted, then click OK.
5. From the Setup menu, select
General Parameters. These
parameters determine what
device operations are performed
before, during, and after
programming.
To learn the parameter’s function,
highlight it, then press F1. The
Help topic is displayed.
Getting Started
3980xpi/3980/3900/2900 User Manual 3-7