3980xpi Users Manual - Data I/O Corporation

Figure 2-8. Typical Start-up Screen For HiTerm Users
Setting Up
If the current terminal type is correct, press ENTER and go to “Set Up High
Speed Download” on page 2-20 if you will be using high speed download, or go
to “Install Devices” on page 2-22.
Selecting a New Terminal Type
To change the current terminal type and/or the default terminal type, follow
these steps.
1. When the programmer prompts Do you want to select a new
terminal type? (Y/N) [N]: press Y, then ENTER.
2. The default and current terminal types and a list of the available terminal
types is displayed. Enter the number corresponding to the terminal type
you want to use, then press ENTER.
If the screen is blank or if random characters are displayed, the Terminal
type configuration is incorrect. Turn off the programmer, turn it on again,
then select the correct terminal.
3. After you change the terminal type for this current session, the
programmer responds with the following prompt: Save terminal type
as power on default? (Y/N) [N]
4. To save the terminal as the powerup default, press Y, then ENTER.
To use this terminal type for this session only, press N, then ENTER.
You are returned to the Main Menu.
3980xpi/3980/3900/2900 User Manual 2-19